USERS GUIDE C2142N/S CL2142AN/S CP2142AN/S C2842N/S CL2842AN/S CP2842AN/S
Contents Remote Control Buttons ................................. 2 Control Panel Buttons ..................................... 3 Connect Peripheral Equipment ...................... 4 Via the SCART connector .............................. 5 Via Ant Input .................................................... 5 Decoder .......................................................... 5 Connecting a decoder with an aerial socket to the TV ....................................................
Remote Control Buttons = Stand By 0 - 9 = Direct Program I-II = Mono/Stereo - Dual I-II MENU = MENU = Programme Up (Cursor Up) = Cursor Right / Volume + TV = TV / Quit Menu (Red) = Sound Menu (Green) = Picture Menu F (Yellow)= Feature Menu (Blue)= Installation Menu Teletext Buttons = Time = Hold = Reveal = Index Page = Teletext AV = External Source (AV1, AV2, AV3) = Programme Down (Cursor Down) = Cursor Left / Volume - - = Two Digit Program Number Entry = Mute GB - 2 -
Control Panel Buttons Front AV input = Power On / Off = Volume - AUDIO L = Audio left (white) = Volume + AUDIO R = Audio right (red) VIDEO = VCR (yellow) - P = Program P + = Program + H-PHONE = Headphone 3,6 mm Ø GB - 3 -
Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your TV. The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV.
Via the SCART connector Your TV set has two SCART connector sockets. If you want to connect peripherals (e.g. video, decoder, etc.) which have SCART connectors, to your TV, use EXT1 and EXT2 inputs. Via Ant Input If you want to connect to your TV, peripherals like videorecorders or decoders, but the device you want to connect does not have SCART connector you should connect it to the ANT input of your TV set. Decoder Cable TV offers you a wide choice of programs.
Preparation Place TV on a solid surface. For ventilation, leave a space of at least 10 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Features It is a remote controlled colour television. 100 programmes from VHF, UHF bands or cable channels can be preset. It can tune cable channels. Controlling the TV is very easy by its menu driven system.
DONTs DONT continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way switch off, withdraw the mains plug and consult your dealer. DONT place water filled vessels on top of T.V. cabinets. DONT remove any fixed cover as this may expose dangerous voltages. DONT leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand-by mode.
6. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet and also remove aerial socket. 7. Replacement Part When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one. Unauthorized substitutions may result in fire, electrical shock, or other hazards. 8. Servicing Please refer all servicing to qualified personnel.
Before Switching on your TV Power connection IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz. After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. Aerial Connections Connect the aerial plug to the aerial input socket located at the back of the TV. How to connect other devices IMPORTANT: Switch off the TV before connecting any external device. Sockets for external connections are on the back of the TV.
programme corresponding to the flashing number pressing RED button. If you do not accept the correspondence between programme numbers and names and want to change them, press MENU button and then BLUE button, so that you enter the Installation menu. In the Installation menu select TUNING menu and enter it. To use tuning menu, refer to the Tuning submenu in the Installation Menu section of this manual. Funtions which you can use out of menu system are described below.
Sound Menu Menu System To change sound settings Your TV has been designed with a menu system, to provide an easy manipulation of a multifunction system. The TV is controlled by choosing the commands displayed on the screen. Below is described the use of the menu system. Press Menu MENU button. Main menu will be displayed on the screen. On the remote control each option is identified with a different colour.
Setting Treble Level: To Store the Settings: Using Using or button select Store. Press button to store current sound settings. The or stored values will be valid for all the programmes. or button select Treble. Press button to increase treble level. Press button to decrease treble level. To Change Headphone Sound Settings: When you connect headphones, you can change the headphone sound settings entering the headphone menu.
Picture Menu Setting Contrast: To change picture settings: Using Enter the Picture Menu directly, pressing the GREEN button or, Press button to increase contrast level. Press button to decrease contrast level. or button select Contrast. Press MENU button, now you are in main menu. In the main menu, select PICTURE using or button, then enter the picture menu pressing or button.
Picture Mode Menu: This menu is used to change the picture size according to the coming transmission. If auto function is selected, then the picture size will be automatically changed according to the transmission. Selecting 4 : 3 mode forces picture ratio size to 4 : 3. Selecting 16 : 9 mode forces picture ratio size to 16 : 9. Child Lock: You can use this feature to prevent display of any programme you do not want to be watched. The Child Lock feature may be set to either On or Off.
Automatic Search Programme will be the first selected item as you enter the TUNING menu. Pressing or button select the programme where you want the tuned station to be stored. (You may also type the programme number using the digit buttons.) Press or button to select Band. Using or button, select the band in which search is to be made. With the or button, select Search. Search button or can be made either forward, pressing button.
corresponding to the programme numbers you pass through will not be tuned. Pressing the RED button will tune the channel on the flashing programme number. Now the colour of the flashing programme number will be red. Again you can use the or or or buttons. To delete a channel from a programme number: Move the flashing onto the channel you want to delete. Press the YELLOW button.
In the installation menu select TV Setup using or button. or but Open the TV Setup menu using ton. In the TV Setup menu select Language and you can change the language to the one you require, us or buttons. As soon as you ing the change the language, the menu items will be displayed in the selected language. Selecting Country Press menu. MENU button so that you enter the main In the main menu select Installation using button.
To Stop Automatic Page Change Teletext Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index). No on screen display will be available in text mode. No contrast, brightness or colour control, but volume control is available in text mode. To operate Teletext Select a TV station on which Teletext is being transmitted. button.
To exit Teletext Remote Control: Press TV button. The screen will switch to TV mode. Your TV no longer responds to the remote control. Press the TV button on the remote control once more. Perhaps the batteries are exhausted. If so you can still use the local keys at the front of your TV. Have you selected the wrong menu? Press TV key to return to TV mode or press MENU to return to the previous menu. To Display the Time While watching a TV programme with Teletext trans button.
Specifications TV BROADCASTING STANDARD .............. PAL B/G PAL SECAM B/G L/L (CP2142AN), (CP2842AN) (CL2142AN), (CL2842AN) RECEIVING CHANNELS ............................. VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20/ S21-S41) NUMBER OF PRESET CHANNELS ........... 100 CHANNEL INDICATOR................................ On Screen Display RF AERIAL INPUT ....................................... 75 Ohm (unbalanced) OPERATING VOLTAGE .............................. 220-240V AC, 50 Hz.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.