COLOUR/COLOR LCD MONITOR CML153XW USER MANUAL MANUEL D’UTILISATION BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE DI ISTRUZIONI READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your colour monitor. SERIAL No. The serial number is located on the rear of the monitor. This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS.
TCO’99 STATEMENT Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling of personal computers.
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
Limited Warranty for USA Customers Only Hitachi America, Ltd. warrants our Hitachi CRT color monitor to be free from defects in material and workmanship for 36 months from the date you purchased it if your purchase was made prior to 1/31/01 or 60 months if your purchase was made after 1/31/01 from your authorized Hitachi America, Ltd. dealer.
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS MONITOR IS LIMITED TO THE 12, 36 or 60 MONTH DURATION OF THIS WRITTEN WARRANTY, AS APPLICABLE. ALL WARRANTIES SET FORTH IN THIS WARRANTY ARE LIMITED TO 12, 36 OR 60 MONTHS FROM THE DATE OF PURCHASE. NO WARRANTIES WHATSOEVER WILL COVER THIS MONITOR BEYOND THE STATED 12, 36 OR 60 MONTHS. HOWEVER, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
. Products used outside Canada. 7. In transit damage claims, improper handling by carrier or post offices. 8. Products or parts there of which have serial numbers removed, altered or defaced. 9. Damage defect or failure caused by, or resulting from, the operation of the unit by incorrect voltages. 10. The use of components that do not meet Hitachi specifications. 11. Products sold in Canada by another organization which is not authorized by HITACHI CANADA LTD 12.
Colour/Color Monitor CML153XW USER MANUAL Congratulations on your selection of the HITACHI Colour/Color Monitor. Read the instructions inside carefully, and keep this user manual for future reference. NOTE: * The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. * The reproduction, transmission or use of this documents or contents is not permitted without express written authority.
Interface for Arm Applications .................................................................................... 21 Connecting the Display to your Computer.................................................................. 21 Connecting the AC Power .......................................................................................... 23 Connecting the Audio Cable....................................................................................... 23 Setting Up the LCD Monitor.......................
Using this Display Safely Common Safety Precautions Please read carefully and make sure you fully understand the following safety precautions: • Operations should be done according to instructions and procedures described in this manual. • Make sure to heed all warnings displayed on the device and manual. Neglecting to do so may result in fire or damage the device. Symbols Safety notifications are presented as shown below.
Handling and Operation Do not handle or operate in ways other than what is depicted in the manual. If there are any problems with the device, turn OFF the power, unplug the cord then notify the dealer where the product was purchased or call a service person. Taking ample care The cautions noted on the device and manual have been carefully considered. Even so, unforeseen incidents may happen. When operating the device, in addition to following instructions, takes ample care during handling and operation.
Warning Abnormal smells. heat, smoke, sounds or If anything abnormal should happen, turn OFF the power and unplug the power cord. Continued use in this condition may lead to electrical shock or fire. The area around the cord should be clear to allow the cord to be easily unplugged. Repair, Modification, Disassembly DO NOT attempt to repair, modify or disassemble the product. This may result in fire or electrical shock. Air vents - The air vents are to prevent the internal temperature from rising.
Placing Objects on the Device DO NOT put flower vases, planters, vessels containing water, pins and paper clips or other metal items on the device. If anything should fall in, using the product in this condition may result in electrical shock. Handling of the power cord Use the power cord supplied with the product and be careful of the following during use. If handled improperly, the cord may be damaged resulting in electrical shock or fire. Never place objects on it.
Impact from Dropping To not drop, bang or subject to physical shock. Using after such incidents may result in electrical shock or fire. Power Usage The usable voltage is 100-120V / 200-240VAC. DO NOT use any other voltage. This may result in electrical shock or fire. Handling the AC adapter - DO NOT wet or handle with wet hands. This may result in electrical shock. - DO NOT use with devices other than this display. This may result in shock, fire, or damage to the device.
Aluminium Electrolysis Condenser The electrolyte condenser used in the AC adapter has a limited life. If used past the life span (approximately 5 years), replace the AC adapter. Leakage or drying up of the electrolyte liquid may result in fire, electrical shock. This may also cause the device itself to malfunction. Damage to the Display Unit Liquid may leak out of the display when damaged. DO NOT touch the liquid. If you should touch the liquid, wash your hands thoroughly with water.
Stand When adjusting the angle, hold the top left and right edges with both hands and move slowly. Using only one hand may cause it to fall. DO NOT place your hand near the stand when adjusting the LCD forward or back. Your fingers may get caught and cause injury. Eyestrain When continuously looking at the display while working, keep the work area lighted at 300 – 1000 Luxes. Additionally, for every hour of work, rest 10 to 15 minutes.
Keep the plastic bag used to wrap the display away from young children. The bag may cause suffocation.
FCC Statement Warning WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For the Customers in CANADA NOTICE : This Class B digital apparatus complies with Canadian ICES-003. For the Customers in the UK THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured GREEN or GREEN and YELLOW. The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Detaching LCD Monitor from Its Stand 1. Remove the rear panel from the monitor. (see Fig. 1-2) 2. Unscrew screws of the hinge bracket 3. Remove the stand from LCD monitor Figure 1-2 Interface for Arm Applications Before installing to mounting device, please refer to Fig.1-2. The rear of this LCD display has four integrated 4 mm, 0.7 pitches threaded nuts, as well as four 5 mm access holes in the plastic covering as illustrated in Figure 1-3.
comply with FCC regulations. A ferrite-core interface cable is included in the LCD Monitor package. This device will not be in compliance with FCC regulations when a non-ferrite-core video cable is used.
Connecting the AC Power 1. Connect the power cord to the AC adapter. (See Fig. 1-5) 2. Connect the AC adapter's DC output connector to the DC Power Jack of the monitor. 3. Connect the power cord to an AC power source. Figure 1-5 Warning We recommand to install a "Surge Protector" device between the AC Adapter and the electrical wall outlet for adding protection against power surges to prevent the effects of sudden voltage variations from reaching the LCD Monitor.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 2 3 4 5 6 7 Stereo Speakers Speaker Volume Control DC Power Switch DC Power-On Indicator Function Select Buttons Adjustment Control Buttons External Headphone Jack PC Audio Stereo output. Increase Volume - Turn knob to right direction. Decrease Volume - Turn knob to left direction. Press the power switch to switch the monitor ON/OFF.
Function Description Icon Function Function Description Brightness This function increases or decreases the brightness of the image. Contrast This function increases or decreases the difference between the dark and light color. H. Position This function shifts the entire display image left or right. V. Position This function shifts the entire display image up or down. A total of 100 scales (0 to 100) are available to adjust the focus and clarity of the display.
Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Display Color Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle Display Colors Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported 15.0" (38 cm) Active matrix color TFT LCD 1024 x 768 1024 x (RGB) x 768 304 x 228 (H x V) 262K 2 200 cd/m (typical) 300: 1 (typical) (15 + 35) ms (typical) 640 Vrms (typical) 6.0 mA rms.
Power Management Mode Power Consumption* AC Input LED Color On 25W maximum 240 VAC Green Standby** 5W maximum 240 VAC Yellow Suspend** 5W maximum 240 VAC Yellow Off** 5W maximum 240 VAC Yellow DC Power Off 5W maximum 240 VAC Disconnected 5W maximum 240 VAC Dark Yellow: Standby, Suspend, Off Dark: DC Power off * Meeting VESA DPMS requirements measured from AC Input end of AC adapter.
Pin Assignment 6 Signal PIN 1 5 11 15 10 Description Signal PIN Description 1 Red 9 +5V 2 Green 10 NC 3 Blue 11 Digital GND 4 Digital GND 12 SDA 5 Digital GND 13 H. Sync. 6 Red Rtn 14 V. Sync. 7 Green Rtn 15 SCL 8 Blue Rtn Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution H. Freq. (KHz) V. Freq. 640 x 350 640 x 400 (Hz) Pixel Freq. (MHz) H/V Sync. Polarity 31.
experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor. PROBLEM Picture is unclear and unstable The picture is unclear and unstable, please perform the following steps : 1. Enter PC to “Shut Down Windows” status while you’re in MS-Windows environment. 2.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.