COLOUR/COLOR LCD MONITOR CML155XW V Plus USER MANUAL MANUEL D’UTILISATION BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE DI ISTRUZIONI READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your colour monitor. SERIAL No. The serial number is located on the rear of the monitor. This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS.
06)Tco95 (5030032724)-7.25.doc 2002/7/26 下午 04:22 TCO’95 STATEMENT Congratulations! You have just purchased a TCO'95 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
06)Tco95 (5030032724)-7.25.doc 2002/7/26 下午 04:22 Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO’95 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Limited Warranty for USA Customers Only ENGLISH Hitachi America, Ltd. warrants our Hitachi CRT color monitor to be free from defects in material and workmanship for 36 months from the date you purchased it if your purchase was made prior to 1/31/01 or 60 months if your purchase was made after 1/31/01 from your authorized Hitachi America, Ltd. dealer.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 ENGLISH ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS MONITOR IS LIMITED TO THE 12, 36 or 60 MONTH DURATION OF THIS WRITTEN WARRANTY, AS APPLICABLE. ALL WARRANTIES SET FORTH IN THIS WARRANTY ARE LIMITED TO 12, 36 OR 60 MONTHS FROM THE DATE OF PURCHASE. NO WARRANTIES WHATSOEVER WILL COVER THIS MONITOR BEYOND THE STATED 12, 36 OR 60 MONTHS.
2002/7/26 下午 03:17 4. External parts such as cabinet. 5. Products purchased outside Canada. 6. Products used outside Canada. 7. In transit damage claims, improper handling by carrier or post offices. 8. Products or parts there of which have serial numbers removed, altered or defaced. 9. Damage defect or failure caused by, or resulting from, the operation of the unit by incorrect voltages. ENGLISH 01-1)E1 英(1)(5030032724)-7.25.doc 10.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Colour/Color Monitor ENGLISH CML155XW V Plus USER MANUAL Congratulations on your selection of the HITACHI Colour Monitor. Read the instructions inside carefully, and keep this user manual for future reference. NOTE: * The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual.
2002/7/26 下午 03:17 Setting the Video Mode ............................................................................................. Setting the Refresh Rate ........................................................................................... Minimizing Power Consumption ................................................................................ Caring for and Cleaning the Display .........................................................................
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Introduction ENGLISH This latest LCD monitor has a 15-inch active matrix TFT (thin film transistor) liquid crystal display module. It is designed for use with any Windows®-based PC. The monitor’s compact-sized design provides great space savings on your computer desk. Features Important features include: Automatic configuration to the PC video settings with maximum XGA resolution.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Using this Display Safely ENGLISH Common Safety Precautions Please read carefully and make sure you fully understand the following safety precautions: - Operations should be done according to instructions and procedures described in this manual. Make sure to heed all warnings displayed on the device and manual. Neglecting to do so may result in fire or damage the device. Symbols Safety notifications are presented as shown below.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Warning ENGLISH Abnormal heat, smoke, sounds or smells. If anything abnormal should happen, turn OFF the power and unplug the power cord. Continued use in this condition may lead to electrical shock or fire. The area around the cord should be clear to allow the cord to be easily unplugged. Repair, Modification, Disassembly DO NOT attempt to repair, modify or disassemble the product. This may result in fire or electrical shock.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Handling of the power cord ENGLISH Use the power cord supplied with the product and be careful of the following during use. If handled improperly, the cord may be damaged resulting in electrical shock or fire. Never place objects on it. - DO NOT pull - DO NOT apply pressure - DO NOT fold - DO NOT wrap DO NOT use next to heating device Plugging and Unplugging - When plugging or unplugging the power cord in the socket, make sure to hold the plug.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Handling the AC adapter - DO NOT wet or handle with wet hands. This may result in electrical shock. - DO NOT use with devices other than this display. This may result in shock, fire, or ENGLISH damage to the device. - DO NOT use or place in areas where heat accumulates. This may result in fire. Multi-Tap Usage TO not attach multiple extension plugs into one outlet.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Contact with Metal and Other Edges When moving the computer be careful when coming in contact with the plastic and metal edges. It is possible to be injured. Use in Unstable Places DO NOT place on sloping or narrow areas that are unstable. The device may drop or fall and cause injury. Display Cable - Arrange the cables so that they are out of the way. If a cable is tripped on, it may cause injury and damage to the connected devices.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 Electronic Interference ENGLISH If used in the vicinity of other electronic devices, they may interfere with each other’s performances. Especially for devices such as radios and televisions, noise may enter their sound reception. If this should happen, try the following: - Place in a location as far away from radios and televisions as possible. - Change the facing of the antenna on the radio or television. - Use a different electrical socket.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 FCC Statement Warning digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
01-1)E1 英(1)(5030032724)-7.25.doc 2002/7/26 下午 03:17 For the Customers in the UK ENGLISH THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Installation ENGLISH Please follow the instructions in this chapter to install your LCD Monitor. Note: Before connecting your display, first read through the instructions in this chapter and the safety precautions in the previous chapter.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 You will use the power button located at the lower right side of the front panel of your display to turn on and off the display. ENGLISH The functions of the three control buttons, which are located at the lower middle-left side of the front panel of your display, are described as below: Button Function Description (1) Bring-up OSD Main Menu. Select (2) Select item for user adjustment.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 4. Plug the analog (or digital) video signal cable into the Analog (or Digital) Video Input port on the back of the display (“ANALOG IN” (or “DIGITAL IN”) as shown above). 5. Connect the other end of the video cable into your computer’s video port. (Please check your computer’s documentation if you’re not sure where the port is located.) 6.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Using Your Display ENGLISH This chapter contains information about using your LCD Monitor. Turning the Display On and Off Use the power button located at the lower right side of the front panel of the display to turn the display on and off. When the display is on, the light (LED) near the Power button is illuminated. The light is green when both the display and PC are active and amber when the display is in a reduced power mode.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 The monitors have a tilt feature that allows you to tilt the display back and forth as well as left and right to find the most comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull it toward you, or turn it left or right until it is in the desired position. The display can be tilted 20º backward and 5º forward or 60º left and 60º right. Note: Do not tilt the display by grasping the top edge.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 The table in “Video Mode” on page 31shows the image refresh rates supported by the display at different screen resolution. Although your LCD monitor supports up to 75 Hz for analog video input, we recommend that you use 60 Hz refresh rate for best performance. ENGLISH To set the refresh rate with a standard Windows installation, follow the steps mentioned in your Windows’s or graphic card’s user’s manual.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 This chapter contains information about how to changing display settings for your LCD Monitor. It is designed with an OSD menu to help you easily adjust to its optimum performance. Note: You must perform auto setup before making any adjustment.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 The following table briefly describes each of the items in the OSD “Main Menu”. ENGLISH Item Description Brightness Controls the brightness of the display by adjusting the light output of the backlight. The default setting of brightness is at maximum. Contrast Adjust the level of difference between light and dark areas of the image. you can use the Contrast item to adjust the contrast which your likes. The default setting of contrast is at 50.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Adjusting the Contrast Setting 1. Bring-up the OSD “Main Menu”. 2. Use ‘Select’ button to move forward to the contrast icon and highlight it. 3. Use ‘Right’ and ‘Left’ button to adjust its value. The range for adjustment is from 0 to 100. ‘Right’ button will increase the Contrast setting and ‘Left’ will decrease it. Adjustment in the “Display” submenu To adjust Display settings you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Analog /Digital Mode: When ‘Color’ is selected, there will show up the submenu as below. And push ‘Right’ and ‘Left’ key to select the submenu items. ENGLISH Color Exit Color Temp RGB Adjust Black Level Adjust The item selected will turn red. 1. EXIT: Pushing ‘SELECT’ key will exit this submenu to the next one. 2.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 ENGLISH 3. RGB Adjust: Pushing ‘SELECT’ key will bring up another submenu as below: RGB Adjust Exit Red Green Blue Push ‘Right’ and ‘Left’ key to select item in this submenu. And the item selected will turn red. (a) Red: When ‘Red’ is selected, push ‘Right’ and ‘Left’ key to adjust the Red Level. Push ‘SELECT’ key will back to the ‘Color’ submenu.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/8/5 下午 05:02 ENGLISH Red - + 100 (b) Green: When ‘Green’ is selected, push ‘Right’ and ‘Left’ key to adjust the Green Level. Push ‘SELECT’ key will back to the ‘Color’ submenu. (c) Blue: When ‘Blue’ is selected, push ‘Right’ and ‘Left’ key to adjust the Blue Level. Push ‘SELECT’ key will back to the ‘Color’ submenu.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 If ‘Color’ is selected, use ‘Right’ and ‘Left’ button to adjust its value. The range for adjustment is from 0 to 100. ‘Right’ button will increase the Color setting and ‘Left’ will decrease it. It will adjust the saturation of the color. ENGLISH Adjustment in the “Clock/Phase” submenu To adjust Clock and Phase settings you should follow the steps below: 1. Bring-up the OSD “Main Menu”. 2.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Adjustment in the “Management” submenu To adjust Management settings you should follow the steps below: ENGLISH 1. Bring-up the OSD “Main Menu”. 2. Use ‘Select’ button to move forward to Management icon and highlight it. This will bring-up the “Management” submenu. There are seven items for your choice in this submenu: Exit, Mode Info, OSD Display, Language, Source and Recall Factory Setting. 3.
2002/7/26 下午 03:22 buttons to highlight and switch Analog, Digital, S-Video or Video input signal. If your selected input signal is missing it will search next input signal by automatic untill get available. The searched sequence by ‘Left’ button is downward, and by ‘Right’ button is upward. When Analog or Digital has selected the Audio1 will activate and Audio2 will be disabled. And when the S-Video or Video has selected the Audio2 will activate and Audio1 will be disabled.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 3. If the image looks correct, choose Yes, and then the submenu will close automatically. OR ENGLISH If the image requires further adjustment, choose No, it will shown up ‘Phase’ bar for your further adjustment by manual. Then you can adjust the phase by ‘Right’ or ‘Left’ buttons. When all text appears well focused and there is no instability in the image, press the ‘Select’ key to end the adjustment and close the OSD menu.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 ENGLISH Troubleshooting This chapter contains information about how to troubleshoot your LCD Monitor. If you have tried all of the items listed below, please contact a qualified service personnel. A. My display doesn’t work, even though the computer appears to work. 1. Make sure the power cable is securely plugged into the display. 2. Make sure the display is turned on. 3. Try turning the display off and then turning it on again. 4.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Technical Information ENGLISH This chapter contains technical information about your LCD Monitor. Display Information LCD Module Display Size Viewing Angle Left/Right Up/Down Luminance Contrast Ratio Display Colors Power Input Maximum power consumption Signal Input Video Signal Sync signals Line (horizontal) frequency Raster (vertical) frequency Pixel dot clock Recommended mode Pedestal tilt Dimensions (W x H x D) Net weight 32 15-in (38.
01-2)E2 英(2)(5030032724)-7.25.doc Humidity Altitude 下午 03:22 6.8 kg 5° ~ 40°C at altitude 0 ~ 2000m 5° ~ 30°C at altitude 2000 ~ 3000m 20% ~ 85% RH, non-condensing 3000m Max. ENGLISH Grass weight Operating Conditions Temperature 2002/7/26 Storage Conditions Temperature -20° ~ 60°C Humidity 5% ~ 95% RH Altitude 10000m Max. Video Modes Your LCD monitor supports the following industry-standard combinations of screen resolution and refresh rates.
01-2)E2 英(2)(5030032724)-7.25.doc 2002/7/26 下午 03:22 Digital: ENGLISH Supported Resolution Vertical Frequency (dots x lines) (Refresh Rate) VGA SVGA XGA 640 x 480 60 Hz 640 x 480 75 Hz 800 x 600 60 Hz 800 x 600 75 Hz 1024 x 768 60 Hz Video: Supported Resolution Vertical Frequency (lines x horizontal frequency) (Refresh Rate) NTSC M 525 x 15.734 kHz 60 Hz PAL B/G/H/I/ 625 x 15.625 kHz D/K/M/N 50 Hz 625 x 15.
< U.S.A. > Hitachi America, Ltd. 2000 Sierra Point Parkway, Brisbane, CA 94005-1835 U.S.A Pre-Sales Support : 1 - 800 - 441 - 4832 Technical Support : 1 - 800 - 536 - 6721 World Wide Web Home page : http://www.hitachidisplays.com < Canada > 1 - 800 - HITACHI or 905 - 821 - 4545 World Wide Web Home page : http://www.hitachi.ca < Europe > Information Media Group Hitachi Home Electronics (Europe) Ltd. Dukes Meadow, Millboard Road Bourne End, Buckinghamshire, SL8 5XF U.K.