COLOUR LCD MONITOR CML158XW USER MANUAL MANUEL D’UTILISATION BEDIENUNGSANLEITUNG MANUAL DE USUARIO MANUALE DI ISTRUZIONI Ο∆ΗΓΙΕΣ ΧΕΙΡΙΣΜΟΥ READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE. For future reference, record the serial number of your colour monitor. SERIAL No. The serial number is located on the rear of the monitor. This monitor is ENERGY STAR® compliant when used with a computer equipped with VESA DPMS.
TCO’99 STATEMENT Congratulations! You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO'99 scheme which provides for an international environmental and quality labelling of personal computers.
Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regarding TCO'99 approved and labelled products may also be obtained via the Internet, using the address: http://www.tco-info.
Limited Warranty for USA Customers Only FOR HITACHI MODELS STARTING WITH “CM”: Hitachi America, Ltd. warrants our CM Hitachi CRT colour monitor models to be free from defects in material and workmanship for 36 months from the date you purchased it if your purchase was made prior to 1/31/01 or 60 months if your purchase was made after 1/31/01 from your authorised Hitachi America, Ltd. monitor dealer.
handling, operation, installation, service and maintenance of the monitor. This warranty is for the benefit of the original owner only in accordance with all terms stated in this warranty. Warranty is not transferable. To obtain warranty service, call 1-800-562-2552 to obtain a return authorisation number and the location of your Hitachi service centre.
Colour Monitor CML158XW USER MANUAL Congratulations on your selection of the HITACHI Colour Monitor. Read the instructions inside carefully, and keep this user manual for future reference. NOTE: * The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. * The reproduction, transmission or use of this documents or contents is not permitted without express written authority.
Connecting the Audio Cable....................................................................................... 14 Setting Up the LCD Monitor........................................................................................ 14 Power Management System ...................................................................................... 14 Chapter 2 Display Controls .............................................................................15 User Controls..........................................
Using this Display Safely Common Safety Precautions Please read carefully and make sure you fully understand the following safety precautions: • Operations should be done according to instructions and procedures described in this manual. • Make sure to heed all warnings displayed on the device and manual. Neglecting to do so may result in fire or damage the device. Symbols Safety notifications are presented as shown below.
Warning Abnormal heat, smoke, sounds or smells. If anything abnormal should happen, turn OFF the power and unplug the power cord. Continued use in this condition may lead to electrical shock or fire. The area around the cord should be clear to allow the cord to be easily unplugged. Repair, Modification, Disassembly DO NOT attempt to repair, modify or disassemble the product. This may result in fire or electrical shock. Air vents - The air vents are to prevent the internal temperature from rising.
Handling of the power cord Use the power cord supplied with the product and be careful of the following during use. If handled improperly, the cord may be damaged resulting in electrical shock or fire. Never place objects on it. -DO NOT pull -DO NOT apply pressure -DO NOT fold -DO NOT wrap -DO NOT use next to heating device Plugging and Unplugging - When plugging or unplugging the power cord in the socket, make sure to hold the plug. Pulling on the power cord may cause a partial breakage resulting in fire.
Multi-Tap Usage TO not attach multiple extension plugs into one outlet. This may result in fire and overloading lines will activate the circuit breakers causing data loss or damage to the product. Usage in Humid or Dusty Areas DO NOT use or store in areas that are humid, dusty or have abundant moisture such as a bathroom. This may cause fire or electrical shock.
CAUTION Contact with Metal and Other Edges When moving the computer be careful when coming in contact with the plastic and metal edges. It is possible to be injured. Use in Unstable Places DO NOT place on sloping or narrow areas that are unstable. The device may drop or fall and cause injury. Display Cable Arrange the cables so that they are out of the way. If a cable is tripped on, it may cause injury and damage to the connected devices. DO NOT place heavy objects on the cable.
Disposal of this Product When disposing of this product, confer with the dealer where this product was purchased or refer to laws of the local government or regulations regarding disposal. Electronic Interference If used in the vicinity of other electronic devices, they may interfere with each other’s performances. Especially for devices such as radios and televisions, noise may enter their sound reception.
FCC Statement Warning WARNING : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For the Customers in the UK THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE UK PLEASE REFER TO THE NOTES ON THIS PAGE. IMPORTANT FOR UNITED KINGDOM WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS The mains lead on this equipment is supplied with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating.
Chapter 1 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is needed to ensure that the Monitor does not become too hot.
Connecting the Display to your Computer 1. Power off your computer. 2. Connect the signal cable to the VGA port on your PC. 3. Make sure connections are secure. Figure 1-3 Connecting the AC Power 1. Connect the power cord to the Monitor AC socket. (See Fig. 1-4) 2. Connect the plug Pin of power cord to an AC power source.
Chapter 2 Display Controls User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 2 3 Stereo Speakers Speaker Volume Control DC Power Switch 4 DC Power-On Indicator 5 Function Select Buttons 6 Adjustment Control Buttons 7 External Headphone Jack PC Audio Stereo output. Increase Volume - Turn knob clockwise. Decrease Volume - Turn knob anti-clockwise Press the power switch to switch the monitor ON/OFF.
Function Description Icon Function Function Description Brightness This function increases or decreases the brightness of the image. Contrast This function increases or decreases the difference between the dark and light colour. H. Position This function shifts the entire display image left or right. V. Position This function shifts the entire display image up or down. A total of 101 scales (0 to 100) are available to adjust the focus and clarity of the display.
Chapter 3 Technical Information Specifications LCD Panel Size Display Type Resolution Display Dot Display Area (mm) Disply Colour Brightness Contrast Ratio Response Time Lamp Voltage Lamp Current Viewing Angle ISO 13406-2 Display Colours Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported 15.0" (38 cm) Active matrix colour TFT LCD 1024 x 768 1024 x (RGB) x 768 304 x 228 (H x V) 262K 2 2 200 cd/m (minimum) 250 cd/m (typical) 400:1 (typical) 35 ms (typical) 760 Vrms (typical) 6.
Power Management On Power Consumption* 30W maximum Standby 3W maximum 240 VAC Yellow Suspend 3W maximum 240 VAC Yellow Mode AC Input LED Color 240 VAC Green Off 3W maximum 240 VAC Yellow DC Power Off 3W maximum 240 VAC Disconnected 3W maximum 240 VAC Dark Yellow: Standby, Suspend, Off Dark: DC Power off * Meeting VESA DPMS requirements measured from AC Input.
Pin Assignment Signal 6 PIN 1 5 11 15 10 Description Signal PIN Description 1 Red 9 +5V 2 Green 10 Cable Detection 3 Blue 11 Digital GND 4 Digital GND 12 SDA 5 Digital GND 13 H. Sync. 6 Red Rtn 14 V. Sync. 7 Green Rtn 15 SCL 8 Blue Rtn Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. 640 x 350 640 x 400 H. Freq. (KHz) 31.469 24.830 V. Freq. (Hz) 70.087 56.420 Pixel Freq.
Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initially experience an unstable or unclear display whenever a new display mode or new VGA card is selected. Attention This LCD Monitor Supports Multiple VGA Modes. Refer to the Standard Timing Table for a listing of modes supported by this LCD Monitor.
< U.S.A. > Hitachi America, Ltd. 2000 Sierra Point Parkway, Brisbane, CA 94005-1835 U.S.A Technical Support : 1 - 800 - 562 - 2552 World Wide Web Home page : http://www.hitachidisplays.com < Europe > Hitachi Europe Ltd Digital Media Group Lower Cookham Road Maidenhead, Berkshire, SL6 8YA U.K.
