Color Plasma Display Monitor CMP402HDE Business Systems Division Hitachi Home Electronics (Europe) Ltd. Dukes Meadow, Millboard Road Bourne End, Buckinghamshire, SL8 5XF, U.K.
NOTE: The information in this manual is subject to change without notice. The manufacturer assumes no responsibility for any errors that may appear in this manual. TRADEMARK ACKNOWLEDGEMENT VGA and XGA are registered trademarks of International Business Machines Corporation. APPLE and Mac are registered trademarks of Apple Computer, Inc. VESA is a trademark of a nonprofit organization, Video Electronics Standard Association.
FEATURES Large-screen, high-definition plasma display panel The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, creates a high-definition, large-screen (aspect ratio: 16:9) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.
CONTENTS ENGLISH FEATURES CONTENTS SAFETY GUIDELINES INSTALLATION INSTRUCTIONS Standard accessories Installation Anti-tumble measures Component Names Installation and Cabling Handling the Remote Controller OPERATING INSTRUCTIONS Turning Power On and Off Input Selection Volume Adjustment Contrast Adjustment Sound Mute Input Signal Status Display On-Screen Display System, EasyMenu Displays According to Selected DISPLAY AREA (RGB Input) OTHER FEATURES Automatic store Reset (Settings Initialization) Signal C
This monitor is designed to be safe to use. However, due to high voltage of about 400 V, fire or serious injury may occur unless you use this monitor in correct way. You are strongly suggested to follow the instruction shown below in order to avoid such injury.
SAFETY GUIDELINES(continued) Warning Fire or electric shock may cause death or serious injury unless you follow the instruction below. ENGLISH If something smells strange or smoke comes from the monitor: Turn off the monitor and disconnect the power plug from the power point immediately. Contact service center after confirming that the smoking has stopped. If you continue to operate the monitor with such abnormal condition, it may cause fire or you may receive an electric shock.
Do not touch the power plug with wet hands. Do not obstruct a ventilation hole. If you obstruct a ventilation hole during the operation of the monitor or just after switching off the power, it may cause a fire or electric shock due to heating up the monitor. Do not put the monitor screen side up. FOR THE CUSTOMERS IN THE U.K. THIS PRODUCT IS SUPPLIED WITH A TWO PIN MAINS PLUG FOR USE IN MAINLAND EUROPE. FOR THE U.K. PLEASE REFER TO THE NOTES ON THIS PAGE.
SAFETY GUIDELINES(continued) Caution Electric shock or other accidents may cause serious injury or damage to your property. ENGLISH You must to check the user manual of the computer when you connect to the monitor. The weight of the monitor or obstructing the ventilation hole of the computer equipment may cause distortion or damage of the computer equipment. Disconnect the power plug from the power point when you carry the monitor.
Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. Hot places such as near heater, place exposed to the direct rays of the sun. A place where the temperature is widely changing. Places with soot, dust or high humidity. Poor air ventilation place. Place near fire. A wet place such as bathroom, or shower room.
SAFETY GUIDELINES(continued) FCC (Federal Communications Commission) Statement Warning WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, ENGLISH pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
INSTALLATION INSTRUCTIONS Standard accessories Color Plasma Display Monitor CMP402HDE ENGLISH This product is complete with the display monitor, plus the accessories shown below. If any of these accessories is missing, please contact your dealer. USER MANUAL BEDIENUNGSANLEITUNG MANUEL UTILISATEUR MANUAL DE USUARIO MANUALE D'USO with EasyMenu! EasyMenu is HITACHI’s On Screen Display function for easy operation. RGB/ VIDEO MENU SELECT ▽ VOLUME △ SUB-POWER READ THE INSTRUCTIONS INSIDE CAREFULLY.
INSTALLATION INSTRUCTIONS (continued) Component Names ENGLISH Front Panel Cabinet (front frame) Remote-control sensor RGB/ VIDEO MENU SELECT ▽ VOLUME △ SUB-POWER Stand Control panel The Adjustment button is located on the bottom.
ENGLISH Rear External device connection terminals AUDIO IN SPEAKER TERMINAL RGB1 (8Ω8W) D-SUB IN V + − − + R RGB2 H B G L/MONO Nearer Terminal 手前側端子 R Further Terminal 奥側端子 R RS232C IN L External speaker terminals RGB input terminals Remote controller POWER button POWER RECALL RGB/ VIDEO RGB/VIDEO button(*) *: "VIDEO" is not available.
INSTALLATION INSTRUCTIONS (continued) Installation and Cabling ENGLISH Connecting to the PC Read Usage Notes ( to ) carefully to ensure maximum safety before proceeding to these steps: Make sure that the display signals produced by your PC meet the specifications of this product. For the specifications of this product, see Product Specifications ( to ). Choose an appropriate site and install the product on a level table where the stand is secure. Installer le moniteur près d'une prise secteur.
Handling the Remote Controller ENGLISH Loading Batteries Open the battery cover. Slide the battery cover towards the arrow mark while pressing it. Load batteries. Load two Size AA batteries included observing the correct polarities. Close the battery cover. Slide back the battery cover towards the arrow mark. Handling the Remote Controller Use the remote controller within about 5 m from front of the unit’s remote-control sensor and within 30 degrees on both sides.
OPERATING INSTRUCTIONS Turning Power On and Off ENGLISH To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and then press the SUB POWER button or the POWER button of the remote control. To turn off the set power supply, press the SUB POWER button of the main unit or the POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF.
Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence of RGB1 -> RGB2 -> RGB1. Remote controller When the same signal is input to RGB1 and RGB2, the PHASE may in some cases shift slightly but this is not a malfunction. In such case, readjust the PHASE of the one being used.
OPERATING INSTRUCTIONS (continued) Contrast Adjustment ENGLISH While the on-screen display system, EasyMenu SELECT button or , is not on display, press the remote controller to adjust the contrast. When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical (V) frequencies of the input signal will be displayed in a guidance image. While the guidance is on display, press the key to narrow the difference between darkness and brightness.
Press the MENU button to open an adjustment menu allowing you to complete various adjustments and settings using the SELECT buttons (The , , , and keys of the remote control or the SELECT or VOLUME button of the main unit.). Pink Press the SELECT button of the main unit ( or key of the remote control) to select an item by moving the pink text. Press the VOLUME button and the and keys of the main unit ( or key of the remote control) to adjust or set the selected item, or to switch the menu.
OPERATING INSTRUCTIONS (continued) Adjustment Item List ENGLISH Menu item Selected characters CONTRAST Adjustment item Contrast PICTURE if RGB is selected BRIGHTNESS Brightness COLOR SELECT Color temperature OPTIONS GAMMA Gamma correction Setup hint Narrows the gap between brightness and darkness. Broadens the gap between brightness and darkness. Black is subdued Black is set off for for increased overall increasedoverall brightness. darkness. WARM WARM NORM NORM COOL COOL 1.0 1.0 2.
Adjustment Item List (continued) Selected characters Adjustment item VGA APPLE 13-inch SVGA XGA SXGA(60) Display APPLE DISPLAY AREA area 16-inch 19-inch Setup hint NORMAL FULL FULL UP/LF UP/LF UP/RI UP/RI DW/LF DW/LF DW/RI DW/RI CENTER CENTER SXGA(75) H.POSITION Horizontal position FULL Moves the Moves the horizontal position horizontal position Adjust the left-side to left. to right. display position. Moves down the vertical position. V.POSITION CLOCK Moves up the vertical position.
OPERATING INSTRUCTIONS (continued) Displays According to Selected DISPLAY AREA (RGB Input) ENGLISH Resolution Overall display Others (Partial Display) FULL ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; ;;;;;;;;;;;;;; Data area ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; ;;;;;;;;;; Display area Data area FULL CENTER UP/LF and UP
OTHER FEATURES Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Item Display Registration condition Reproduction condition Sound volume Sound balance Treble Bass Mute volume Input status automatic display Enlargement Language selection VOLUME BALANCE TREBLE BASS MUTE LEVEL AUTO FREQ. INTERPOLATION LANGUAGE One set can be recorded. During normal signal reception.
OTHER FEATURES (continued) Signal Check ENGLISH The status of signal reception is checked automatically and the result is displayed on the screen. Status Signals are received normally. Display Action The input terminal and the horizontal and vertical frequencies are displayed in a guidance image. RGB1 [D-SUB] H : 46.5kHz, V : 60Hz A sync signal could not be detected. The guidance message “POWER SAVE” is displayed for about 5 seconds.
When the RGB input jack is selected This unit meets the power-saving requirements of VESA and International Energy Program. When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures ENGLISH Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. WARNING Customer servicing can be hazardous. Symptom Point to check The screen appears blank with the power-indicating lamp off. Check the way the power cable is connected. Press the power switch. The message “POWER SAVE” is displayed.
Point to check Flicker causes stripes to move up and down (during personal computer signal input). When the vertical frequency of the personal computer is lower than 75Hz, try increasing the frequency (upper limit: 75Hz). This may improve the situation in some cases. The temperature of the display panel surface is high. The plasma display panel is lighting the phosphors by the discharge of internal radiation. In some cases, this may cause the temperature of the panel surface to increase.
TROUBLESHOOTING (continued) Actions to Correct Abnormal Displays ENGLISH Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the adjustments suggested below. Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (display 1). The display image appears flowing (display 2) (RGB input).
Text displayed across the screen appears blurred in its entirety (display 2). A fine pattern flickers when displayed on the screen (display 3). Display 2 Display 3 Before adjustment ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ abcdefgABCDEFGabcd Example ENGLISH Symptom 2 Before adjustment ABC ABC After adjustment After adjustment ABC Adjustment procedure Press MENU button to open the adjustment menu. Press SELECT button several times to choose DISPLAY. Press to open the DISPLAY menu.
PRODUCT SPECIFICATIONS Product specifications and designs are subject to change without notice. ENGLISH General Specifications Type CMP402HDE Display Approx. 42 inches (922 mm (H), vertical 522 mm (V), diagonal 1059 mm) dimensions Panel Resolution 1024 (H) x 1024 (V) pixels RGB input Input terminals RGB two-line two input terminals (D-sub 15-pin) (BNC) RGB audio two-line two input terminals (left, right) Input signals Video signals 0.7 V/1.
Signal Input Pin Input signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R. video G. video or sync on green B. video No connection No connection R.GND G.GND B.GND No connection GND No connection No connection H. sync or H/V composite sync V.sync.
PRODUCT SPECIFICATIONS (continued) Recommended Signal List ENGLISH The following are recommended for use with this projector. (RGB input): Signal mode Signal name Resolution Horizontal frequency (Hz) Vertical frequency (Hz) Dot clock frequency (Hz) Remarks VGA VESA Full display only Apple The type of video board or connecting cable used may not allow for correct displays Set H.POSITION, V.POSITION, CLOCK and PHASE.
Hitachi, Ltd. Tokyo, Japan International Sales Division THE HITACHI ATAGO BUILDING, No. 15 –12 Nishi Shinbashi, 2 – Chome, Minato – Ku, Tokyo 105-8430, Japan. Tel: 03 35022111 HITACHI EUROPE LTD, Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA UNITED KINGDOM Tel: 01628 643000 Fax: 01628 643400 Email: consumer -service@hitachi-eu.com HITACHI EUROPE S.A. 364 Kifissias Ave. & 1, Delfon Str. 152 33 Chalandri Athens GREECE Tel: 1-6837200 Fax: 1-6835964 Email: service.hellas@hitachi-eu.