Owner's Manual

10
ENGLISH
OPERATING INSTRUCTIONS
(continued)
The adjustment status will be displayed as guidance
while you press these buttons.
While the guidance is on display, press or to
turn up the volume.
While the guidance is on display, press or to
turn down the volume.
You can also adjust the sound volume setting via the
on-screen display system, EasyMenu
The sound volume adjustment mode will exit when
no keys are entered for 5 seconds. (The adjustment
status guidance will disappear automatically.)
Volume Adjustment
While the on-screen display system, EasyMenu ( ) is not on display, press the remote
controller VOLUME button or (or the unit VOLUME button
or to adjust
the sound volume.
VOLUME : 30
VOLUME
Set unit
Remote
controller
VOLUME
Input Selection
Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the
sequence of RGB1 -> RGB2 -> VIDEO1 -> VIDEO2 -> RGB1.
RGB1 (D-sub input)
RGB2 (BNC input)
VIDEO1 (
composite or S input )
VIDEO2 ( COMPONENT input )
RGB/
VIDEO
Remote
controller
RGB/VIDEO
Set unit
When the same signal is input to RGB1 and
RGB2, the phase may in some cases shift
slightly but this is not a malfunction. In such
case, readjust the PHASE of the one being
used.
12
12
Sound volume setting
Adjustment status guidance