Owner's Manual

25
ENGLISH
OTHERFEATURES (continued)
Power Save Mode
When the RGB input is selected
• When this unit is connected to a VESA DPMS computer, the Power Save (Off) mode can be set to be activated automatically when the
computer is not being used to reduce power consumption by this unit.
When the Video Input is selected
（
This function can only be used when the optional video unit has been inserted.
）
• When there is no video signal input, the power-saving system operates to reduce the power consumed by the sunit.
RGB sync signal
Horizontal Yes No Yes No
Vertical Yes Yes No No
Video signal Active (normal display) Blank (no video)
Operation mode On Off
Indicating lamp Lights green Lights orange
Power consumption 370W
1W or less (100-120V)
2W or less (200-240V)
Video signal Yes No
Screen display Active (normal display) Blank (no video)
Operation mode On Off
Indicating lamp Lights green Lights orange
Power consumption 370W
1W or less (100-120V)
2W or less (200-240V)
Returning to operating status
• Operate the personal computer, or press either the INPUT SELECT button of the main unit or the RGB//VIDEO button of the remote control.
* During two-screen displayed, the power save mode will not be activated even if the horizontal/vertical sync signal (or video signal) is no longer
input.
TWO SCREEN TABLE
Right screen
(Sub-screen)
Left screen
RGB1
PC input
RGB2
PC input
RGB1
Component
RGB2
Component
VIDEO1
(RGB VIDEO)
VIDEO2
Notes
RGB1
PC input
× × ○ ○
PC window
RGB2
PC input
× × ○ ○
PC window
RGB1
Component
× × ○ ○
Two screens
RGB2
Component
× × ○ ○
Two screens
VIDEO1
(RGB VIDEO)
× × × ×
○
（×）
Two screens
VIDEO2 × × × × ○
Two screens