User manual

Hitachi hard disk drive specifications
101
10.2 PIO Data Out commands
These commands are:
 Device Configuration Set
 Download Microcode
 Format Track
 Security Disable Password
 Security Erase Unit
 Security Set Password
 Security Unlock
 Set Max Set Password command
 Set Max Unlock command
 SMART Write Log Sector
 Write Buffer
 Write Log Ext
 Write Multiple
 Write Multiple Ext
 Write Multiple FUA Ext
 Write Sector(s)
 Write Sector(s) Ext
 Write Stream PIO
Execution includes the transfer of one or more 512 byte sectors of data from the host to the device.
10.3 Non-Data commands
These commands are:
 Check Power Mode
 Configure Stream
 Device Configuration Freeze Lock
 Device Configuration Restore
 Execute Device Diagnostic
 Flush Cache
 Flush Cache Ext
 Idle
 Idle Immediate
 Initialize Device Parameters
 NOP
 Read Native Max Address
 Read Native Max Address Ext
 Read Verify Sector(s)
 Read Verify Sector(s) Ext
 Recalibrate
 Security Erase Prepare
 Security Freeze Lock
 Seek
 Set Features
 Set Max Address
 Set Max Address Ext
 Set Max Lock command
 Set Max Freeze Lock command
 Set Multiple Mode
 Sleep
 SMART Disable Operations
 SMART Enable/Disable Attribute Autosave