User manual

Hitachi hard disk drive specifications

172

Cylinder High (HOB=1)

LBA (47:40) of the address of the first unrecoverable error.

CCTO (Error, bit 0)

CCTO bit shall be set to one if a Command Completion Time Limit Out error has

occurred.

SE (Status, bit 5)

SE (Stream Error) shall be set to one if an error has occurred during the execution

of the command and the RC bit is set to one. In this case the LBA returned in the

Sector Number registers shall be the address of the first sector in error, and the

Sector Count registers shall contain the number of consecutive sectors that may

contain errors. If the RC bit is set to one when the command is issued and a

UNC, IDNF, ABRT, or CCTO error occurs, the SE bit shall be set to one, the ERR

bit shall be cleared to zero, and the bits that would normally be set in the Error