User Manual

108
Troubleshooting
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon Cases not involving a machine defect
Reference
page
Sound does not
come out.
The signal cables are not correctly connected.
Correctly connect the audio cables.
10 ~ 15
The MUTE function is working.
Restore the sound pressing VOLUME +/- button on the
remote control.
22
The volume is adjusted to an extremely low level.
Adjust the volume to a higher level using the menu function
or the remote control.
22, 50,
51
The AUDIO SOURCE/SPEAKER setting is not correct.
Correctly set the AUDIO SOURCE/SPEAKER in AUDIO menu.
50
The Sound button (♪) or checkbox is disabled.
If you have selected USB TYPE A, turn the sound on from
the Thumbnail menu.
If you have selected USB TYPE B, put a check mark on the
Sound checkbox in the Options window of “LiveViewer Lite
for USB”.
If you have selected LAN, put a check mark on the Sound
checkbox in the Option menu of “LiveViewer”.
82, 91,
95
(continued on next page)