User Manual

SETUP menu

From the SETUP menu, items shown in the table

below can be performed.

Select an item using the ▲/▼ cursor buttons, and

press the ► cursor button or ENTER button to

execute the item. Then perform it according to the

following table.

Item Description

D-ZOOM

Using the ◄/► cursor buttons adjusts the magnication ratio.

Small

Large

• The on-screen menu might be displayed outside of the image

display area depending on the adjustment value of the ASPECT,

D-ZOOM and

KEYSTONE. Changing the values of ASPECT,

D-ZOOM and

KEYSTONE may x the symptom.

D-SHIFT

Using the ◄/►/▲/▼ cursor buttons adjusts the picture position.

• The D-SHIFT adjustment values are not valid when the D-ZOOM

is set to 256 (full screen). (CP-BX301WN)

• The D-SHIFT adjustment values are not valid when the D-ZOOM

is set to 320 (full screen). (CP-BW301WN)

PICTURE POSITION

(CP-BX301WN)

Using the ▲/▼ cursor buttons selects the vertical picture position.

TOP

MID

BOTTOM

The PICTURE POSITION is not changed if any of the following

cases apply.

• The ASPECT is set to 4:3.

• The input signal has an aspect ratio of 4:3 or vertically larger than

4:3, while the ASPECT is set to NORMAL.

• Vertical size of the displayed image is full on the effective display

area, while the ASPECT is set to NATIVE.

• One of the following messages is displayed on the screen:

"NO INPUT IS DETECTED"

"SYNC IS OUT OF RANGE"

"INVALID SCAN FREQ."

• The BLANK or TEMPLATE function is selected.

(continued on next page)