Operation Manual

56
OPTION menu
Item Description
MY BUTTON
This item is to assign one of the following functions to MY BUTTON
1/2 on the remote control (

6).
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY
BUTTON - (1/2) and press the ► or ENTER button to display the
MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
functions to the chosen button. Press the ENTER or INPUT
button to save the setting.
• COMPUTER IN1: Selects the input from COMPUTER IN1 port.
• COMPUTER IN2: Selects the input from COMPUTER IN2 port.
• HDMI: Selects input from HDMI port.
• VIDEO: Selects the input from VIDEO port.
• INFORMATION: Displays SYSTEM_INFORMATION, INPUT_
INFORMATION (

59) or nothing.
• MY MEMORY: Loads one of adjustment data stored (

35).
When more than one data are saved, the adjustment
changes every time the MY BUTTON is pressed.
When no data is saved in memory, the
dialog "No saved data" appears.
When the current adjustment is not
saved to memory, the dialog as shown in
the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the
current adjusted condition.
(continued on next page)
(continued on next page)