User Guide

7
ENGLISH
Operating
Operating
Operating
Turning on the power
WARNING
►
When the power is on, a strong light is emitted. Do not look
into the lens or vents of the projector.
NOTE • Turn the power on in right order. Please power on the projector before
the connected devices.
1.
Open the lens cover, and set the power switch to the ON position.
The power indicator will light to solid orange. Then wait several seconds
because buttons may not function for these several seconds.
2.
Press the STANDBY/ON button on the projector or remote control.
The projector lamp will light up and the POWER indicator will begin blinking
green. When the power is completely on, the indicator will stop blinking and
light green.
Displaying
1.
To select an input signal, use the button of INPUT (projector), or the buttons
of RGB, VIDEO or SEARCH (remote control).
2.
To change the aspect ratio, use the button ASPECT (remote control).
3.
To adjust the zoom and focus, use the ZOOM buttons (remote control) and
the focus ring (projector).
STANDBY/ON
button
VIDEO
RGB
SEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO
BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM
+
-
POWER indicator
INPUT button
Power switch
STANDBY/ON
INPUT
MENU
LAMP
TEMP
POWER
POWER
(Solid orange)
POWER
(Blinking green)
POWER
(Solid green)
Focus ring
ZOOM buttons
SEARCH button
RGB button
VIDEO button
ASPECT button