Datasheet

60
NETWORK Menu
Remember that incorrect network settings on this projector
may cause trouble on the network. Be sure to consult with
your network administrator before connecting to an existing
access point on your network.
Select “NETWORK” from the main menu to access the
following functions.
Select an item using the ▲/▼ cursor buttons on the projector or remote control,
and press the ► cursor button on the projector or remote control, or ENTER
button on the remote control to execute the item. Then perform it according to the
following table.
See the User’s Manual - Network Guide for details of NETWORK operation.
NETWORK Menu
• If you are not utilizing SNTP (Date/Time Settings of the User’s
Manual (detailed) - Network Guide), then you must set the DATE AND TIME
during the initial installation.
NOTE
Item Description
SETUP
Selecting this item displays the SETUP Menu
for the network.
Use the ▲/▼ buttons to select an item, and
the ► or
ENTER button on the remote control
to perform the item.
DHCP
(Dynamic
Host
Conguration
Protocol)
Use the ▲/▼ buttons to turn DHCP on/off.
ON
Ù
OFF
Select OFF when the network does
not have DHCP enabled.
• When the “DHCP” setting changes to “ON”, it takes a
little time to obtain IP address from DHCP server.
• Auto IP function will be assigned an IP address if the
projector could not obtain an IP address from server
even if DHCP is “ON”.
(continued on next page)