Projector CP-X1230 User's Manual - Operating Guide TECHNICAL Dimensions [unit: mm] 1
Example Of Computer Signal Resolution H×V fH (kHz) fV (Hz) Rating Signal mode Display mode 720 × 400 37.9 85.0 VESA TEXT Zoom in 640 × 480 31.5 59.9 VESA 630 × 480 35.0 66.7 640 × 480 37.9 72.8 640 × 480 37.5 75.0 640 × 480 43.3 800 × 600 800 × 600 VGA (60Hz) Zoom in Mac13"mode Zoom in VESA VGA (72Hz) Zoom in VESA VGA (75Hz) Zoom in 85.0 VESA VGA (85Hz) Zoom in 35.2 56.3 VESA SVGA (56Hz) Zoom in 37.9 60.3 VESA SVGA (60Hz) Zoom in 800 × 600 48.1 72.
Initial Set Signals The following signals are used for the initial settings. The signal timing of some computer models may be different. In such case, adjust the items V POSITION and H POSITION in the PICTURE-2 menu. Back porch b Front porch d Display interval c Back porch b Front porch d Display interval c DATA DATA H. Sync. V. Sync. Sync. a Computer / Signal Sync. a Horizontal signal timing (µs) TEXT a 2.0 b 3.0 c 20.3 d 1.
Connection To The Ports B G D CONTROL REMOTE CONTROL AUDIO IN 1 AUDIO IN2 E RGB G/Y R/CR/PR B/CB/PB A RGB OUT H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC C H A RGB 5 4 3 2 1 0 9 8 7 6 e w q = - D-Sub 15 pin shrink jack Pin 1 2 3 4 5 Signal Video input Red Video input Green Video input Blue Ground • Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ω terminator (positive) • H./V. sync. Signal: TTL level (positive/negative) • Composite sync.
Connection To The Ports (continued) L CONTROL REMOTE CONTROL AUDIO IN 1 AUDIO IN2 R/CR/PR RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB K Y V I J R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC I VIDEO IN • RCA jack • System: NTSC, PAL, SECAM, PAL-M, PAL-N, NTSC4.43, PAL60 • 1.0 ± 0.1 Vp-p at 75 Ω terminator J S-VIDEO Pin 1 1 2 3 4 2 3 4 Signal Color signal: 0.286 Vp-p (NTSC, burst), 75 Ω terminator Color signal: 0.300 Vp-p (PAL/SECAM, burst), 75 Ω terminator Brightness signal: 1.
Connection To The Ports (continued) F CONTROL REMOTE CONTROL AUDIO IN 1 AUDIO IN2 R/CR/PR RGB OUT RGB G/Y B/CB/PB H AUDIO OUT CR /PR CB/PB Y V R - AUDIO IN - L VIDEO IN S-VIDEO IN BNC F CONTROL Computer side CONTROL port 1 2 3 4 5 6 7 8 9 D-Sub 9 pin plug - 5 4 3 2 1 9 8 7 6 D-Sub 9 pin jack RD TD GND RTS CTS - 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 CD RD TD DTR GND DSR RTS DTS RI RS-232C port 5 4 3 2 1 9 8 7 6 D-Sub 9 pin jack 1 2 3 4 5 6 7 8 9 D-Sub 9 pin plug memo About th
RS-232C Communication Connecting The Cable 1 Turn off the projector and the computer power supplies. 2 Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C cable. Use the cable that fulfills the specification shown in the previous page. 3 Turn on the computer power supply and after the computer has started up, turn on the projector power supply. Communications Setting 19200bps, 8N1 1. Protocol Consist of header (7 bytes) + command data (6 bytes). 2.
RS-232C Communication (continued) Requesting projector status (Get command) (1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)+‘00H’+‘00H’) from the computer to the projector. (2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer. Changing the projector settings (Set command) (1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.
RS-232C Communication (continued) Command Data Chart Names Operation type Command data Header Type Setting code Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00 Keystone V Increment Decrement BE EF BE EF 03 03 06 00 06 00 DF D3 0E D2 04 00 05 00 07 20 07 20 00 00 00 00 Keystone V Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00 Get BE EF 03 06 00 E9 D0 02 00 0B 20 00 00 Increment BE EF 03 06 00 8F D0 04 00 0B 20 00 00 Decrement BE EF 03 06 00 5E D1 05 00 0
RS-232C Communication (continued) Command Data Chart (continued) Names Language Operation type Set Type Setting code ENGLISH BE EF 03 06 00 F7 D3 01 00 05 30 00 00 FRANÇAIS BE EF 03 06 00 67 D2 01 00 05 30 01 00 DEUTSCH BE EF 03 06 00 97 D2 01 00 05 30 02 00 ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00 ITALIANO BE EF 03 06 00 37 D1 01 00 05 30 04 00 NORSK BE EF 03 06 00 A7 D0 01 00 05 30 05 00 NEDERLANDS PORTUGUÊS BE EF 03 06 00 57 D0 01 00 05 30
RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Command data Header Type Setting code 50 BE EF 03 06 00 EF F6 01 00 B3 30 05 00 60 BE EF 03 06 00 7F F7 01 00 B3 30 04 00 70 BE EF 03 06 00 4F F5 01 00 B3 30 03 00 80 BE EF 03 06 00 DF F4 01 00 B3 30 02 00 90 BE EF 03 06 00 2F F4 01 00 B3 30 01 00 100 BE EF 03 06 00 BF F5 01 00 B3 30 00 00 Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00 Get BE EF 03 06 00 01 D2
RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Get V Position Increment Decrement V Position Reset Execute Get H Position Increment Decrement H Position Reset Execute Get H Phase Increment Decrement Get H Size Increment Decrement H Size Reset Execute Get Over Scan Increment Decrement Over Scan Reset Execute AUTO RGB Set SMPTE240 Color Space REC709 REC601 Get COMPONENT Set Component SCART RGB Get AUTO NTSC PAL SECAM Set Video Format NTSC 4.
RS-232C Communication (continued) Command Data Chart (continued) Names Video NR S2-Aspect Auto Adjust Auto off Auto Search Blank Color Blank on/off Startup Operation type Command data Header Type Setting code LOW Set MIDDLE HIGH Get TURN OFF Set TURN ON Get Execute Get Increment Decrement TURN OFF Set TURN ON Get My Screen Original BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00 06 00 06 00 0
RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Get Volume Increment Decrement TURN OFF Set Mute TURN ON Get Lamp Time Get Lamp Time Reset Execute Filter Time Get Filter Time Reset Execute Get Magnify Increment Decrement Normal Set Freeze Freeze Get TURN OFF Set TURN ON Command data Header BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF BE EF 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 06 00
RS-232C Communication (continued) Command Data Chart (continued) Names Operation type Type Setting code BE EF 03 06 00 FE 22 01 00 00 23 00 00 Large Small Get BE EF BE EF BE EF 03 03 03 06 00 06 00 06 00 6E 23 9E 23 CD 22 01 00 01 00 02 00 00 23 00 23 00 23 01 00 02 00 00 00 Upper Left BE EF 03 06 00 02 23 01 00 01 23 00 00 Upper Right BE EF 03 06 00 92 22 01 00 01 23 01 00 Bottom Left BE EF 03 06 00 62 22 01 00 01 23 02 00 Bottom Right BE EF 03 06 00 F2 23 01
RS-232C Communication (continued) Command Data Chart (continued) Names Power Up Source Auto Adjust Enable Internal Speaker Lens Lock Auto Power On 16 Operation type Set Set Set Set Set Command data Header CRC Action Type Setting code Last Ch BE EF 03 06 00 9E D9 01 00 18 20 10 00 RGB BNC Component BE EF BE EF BE EF 03 03 03 06 00 06 00 06 00 5E D4 9E D6 0E D7 01 00 01 00 01 00 18 20 18 20 18 20 00 00 04 00 05 00 S-Video BE EF 03 06 00 3E D5 01 00 18 20 02 00 Video
