Operation Manual

ManualsBrandsHitachi ManualsImpact DrillDH30PC3

English

*Be sure to check the nameplate on product as it is subject to change by areas.

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (rotation + striking)

䡬 Drill bit (Taper shank) and taper shank adapter

SPECIFICATIONS

STANDARD ACCESSORIES

(1) Case (Molded plastic) ............................................... 1

(2) Side handle ................................................................ 1

(3) Stopper ........................................................................ 1

(4) Dust cup ..................................................................... 1

(5) Syringe ........................................................................ 1

Drill bit (Taper shank)

Taper shank adapter

(SDS-plus shank)

Cotter

Outer diameter

11.0 mm

12.3 mm

12.7 mm

14.3 mm

14.5 mm

17.5 mm

21.5 mm

Taper mode Applicable drill bit

Morse taper (No.1) Drill bit (taper shank) 11.0 ~ 17.5 mm

Morse taper (No.2) Drill bit (taper shank) 21.5 mm

A-taper Taper shank adapter formed A-taper or B-taper

is provided as an optional accessory, but the

B-taper

drill bit for it is not provided.

Model DH30PB DH30PC

Voltage (by areas)* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)

Power input 850 W*

No-load speed 0 – 850 min

-1

(/min).

Full-load impact rate 0 – 3700 min

-1

(/min).

Capacity: concrete 4 – 30 mm

steel 13 mm

wood 32 mm

Weight (without cord and side handle) 4.7 kg 4.8 kg

Rotation + Striking

Function

Rotation only

Striking only

Standard accessories are subject to change without

notice.