Operation Manual

48
Item
No.
Part Name Q’TY
1 RETAINER 1
2 DUST COVER 1
3 ROLL PIN D4 × 20 2
4 SEAL LOCK HEX. SOCKET HD. BOLT M6 × 25 4
5 FRONT COVER 1
6 O-RING (S-25) 1
7 O-RING 1
8 RETAINER PIN 2
9 DAMPER (B) 2
10 PUSHING BUTTON 1
11 SET SPRING 1
12 CYLINDER CASE 1
13 HEX SOCKET HD. BOLT (w/flange) M6 × 25 4
14 O-RING (1AS-60) 1
15 DAMPER (B) 1
16 DRIVER HOLDER 1
17 DRIVER 1
18 O-RING (C) 1
19 SECOND HAMMER 1
20 DAMPER WASHER 1
21 DAMPER 1
22 DAMPER HOLDER 1
23 DAMPER HOLDER (B) 1
24 DAMPER (C) 1
25 SLIDE RING 1
26 CYLINDER 1
27 CYLINDER KEY 2
28 SLIDE SLEEVE (B) 1
29 SLIDE SLEEVE (A) 1
30 SPRING (A) 1
31 BEVEL GEAR 1
32 THRUST WASHER 1
33 STRIKER 1
34 O-RING 2
35 PISTON PIN 1
36 PISTON 1
37 CONNECTING ROD 1
38 BALL BEARING 6201DDCMPS2L 1
39 DUST WASHER (B) 1
40 ARMATURE 1
41 FAN GUIDE 1
42 HEX. HD. TAPPING SCREW D5 × 55 2
43 STATOR ASS’Y 1
44 BRUSH TERMINAL 2
45 HOUSING ASS’Y 1
46 SLIP CLUTCH ASS’Y 1
47 BEVEL PINION 1
48 FEATHER KEY 3 × 3 × 82
49 COLLAR 1
50 OIL SEAL (A) 1
51 BALL BEARING 6002DDCMPS2L 1
52 WASHER 1
53 WASHER (A) 1
54 GEAR HOLDER 1
55 SPRING (C) 10
56 NEEDLE 10
57 SECOND GEAR 1
58 SPACER 1
59 BALL BEARING 629VVC2PS2L 1
60 BEARING WASHER (C) 1
61 SEAL LOCK HEX. HD. BOLT M6 × 20 2
62 SEAL LOCK HEX. SOCKET HD. BOLT M6 × 45 4
63 HITACHI LABEL 2
64 SEAL LOCK HEX. SOCKET HD. BOLT M5 × 16 6
65 CRANK COVER 1
66 CYLINDER O-RING (B) 1
67 CRANK CASE 1
68 SEAL PACKING 1
69 RETAINING RING FOR D10 SHAFT 1
70 CRANK SHAFT 1
71 RETAINING RING FOR D40 HOLE 1
72 BALL BEARING 6203DDCMPS2L 1
73 O-RING (S-40) 1
74 OIL SEAL (B) 1
75 FIRST GEAR 1
76 NEEDLE BEARING (M661) 1
77 GEAR COVER 1
78 WING BOLT M6 × 12 1
79 MOUNT 1
80 NUT M6 1
81 HANDLE BOLT 1
82 BAND 1
83 SIDE HANDLE 1
84 BRUSH CAP 2
85 CARBON BRUSH 2
86 BRUSH HOLDER 2
87 HEX. SOCKET SET SCREW M5 × 82
88 WASHER (A) 1
89 BALL BEARING 608VVC2PS2L 1
90 BEARING HOLDER 1
91 TAIL COVER 1
92 TAPPING SCREW (W/FLANGE) D5 × 20 4
93 NOISE SUPPRESSOR 1
94 HANDLE 1
95 INTERNAL WIRE 1
96 CONNECTOR 1
97 NAME PLATE 1
98 CORD 1
99 CORD ARMOR 1
100 INTERNAL WIRE 1
101 SWITCH (C) 1
102 PILLAR TERMINAL 1
103 CONNECTOR 1
104 CORD CLIP 1
105 TAPPING SCREW (W/FLANGE) D4 × 16 2
106 HANDLE COVER 1
107 TAPPING SCREW (W/FLANGE) D4 × 25 (BLACK) 2
501 CASE 1
Item
No.
Part Name Q’TY
08Back_DH38SS_WE 4/27/09, 17:0348