Operation Manual

GB-31
Basic Operation
Connecting to a
Computer
Product Overview
Hints and Tips
Specications and
Safety Warning
Safety Warnings
Retain the manual. If you pass the unit onto a third party make sure to include this r
manual.
Damage
Please inspect the unit for damage after unpacking. r
Do not continue to operate the unit if you are in any doubt about it working r
normally, or if it is damaged in any way - switch o and consult your dealer.
Temperature
Avoid extreme degrees of temperature, either hot or cold. Place the unit well away r
from heat sources such as radiators or gas/electric res.
Avoid exposure to direct sunlight and other sources of heat.r
Naked Flames
Never place any type of candle or naked ame on the top of or near the unit.r
Moisture
Do not expose this unit to rain, moisture, dripping or splashing.r
If you spill any liquid into the unit, it can cause serious damage. Switch it o and r
consult your dealer.
Interference
Do not place the unit on or near appliances which may cause electromagnetic r
interference. If you do, it may adversely aect the working of the unit, and cause a
distorted picture or sound.
LCD screen
The LCD screen is manufactured using high-precision technology. However, some r
tiny black points and/or bright points (red, blue or green in colour) may constantly
appear on the LCD screen. These points are generated in the manufacturing process
and are normal.
Earphones
For trac safety, do not use earphones while driving or cycling.r
Listening to loud sounds for prolonged periods of time may permanently damage r
your hearing.
Before putting on earphones, turn the volume down then put the earphones on and r
slowly increase the volume until you reach a comfortable listening level.
Batteries
Please dispose of the battery correctly by following the guidance in this manual.r
Service
Do not open any xed covers. The unit does not contain any user-serviceable parts. r
Please leave all maintenance work to qualied personnel.
Maintenance
Ensure to switch o the unit before cleaning.r
Do not use any type of abrasive pad or abrasive cleaning solutions as these may r
damage the unit’s surface.
Do not use liquids to clean the unit.r