Operation Manual
English
30
SPECIFICATIONS
POWER TOOL
CHARGER
STANDARD ACCESSORIES
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (EB1214L, EB1220BL, EB1222HL, EB1230HL)
Optional accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals.
Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger and checking the polarities
as shown in Fig. 3.
CAUTION
If the batteries are inserted in the reverse direction,
not only recharging will become impossible, but it
may also cause problems in the charger such as a
deformed recharging terminal.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals.) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
Model DS12DM
No-load speed (Low/High) 0 – 350 / 0 – 1200 min
–1
Wood
27 mm
Drilling
(Thickness 18mm)
Metal Steel: 13 mm,
Capacity (Thickness 1.6mm) Aluminum: 13 mm
Machine screw 6 mm
Driving
Wood screw
6.8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
Rechargeable battery
EB1220BL: Ni-Cd 12 V (2.0 Ah, 10 cells)
EB1230HL: Ni-MH 12 V (3.0 Ah, 10 cells)
Weight 1.7 kg
Model UC14YFA
Charging voltage 7.2 – 14.4 V
Weight 0.6 kg
1 Plus driver bit (No. 2) ...................... 1
DS12DM 2 Charger (UC14YFA) ......................... 1
3 Plastic case ....................................... 1