Extra Information

10
English
STANDARD ACCESSORIES
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
Battery
Optional accessories are subject to change without notice.
APPLICATIONS
Driving and removing of machine screws, wood
screws, tapping screws, etc.
Drilling of various metals
Drilling of various woods
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger, as shown
in Fig. 3, 4.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
(BSL1430)
(BSL1440)
(BSL1450)
(BSL1415)
(BSL1425)
(BSL1830)
(BSL1840)
(BSL1850)
1 Plus driver bit (No.2) .................... 1
2
Charger (UC18YRSL or UC18YFSL) .......
1
3 Battery .............................................. 2
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
Charger, Battery, Plastic case and
Battery cover are not contained.
(BSL1825)
DS14DSL
DS18DSL
CHARGER
Model UC18YRSL UC18YFSL
Charging voltage 14.4 V – 18 V
Weight 0.6 kg 0.5 kg
DS14DSL
(NN)
DS18DSL
(NN)
Table 1
Indications of the pilot lamp
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for 0.1
seconds. (off for 0.1 seconds)
Lights continuously
Lights for 1 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Before
charging
While
charging
Charging
complete
Charging
impossible
Blinks
(red)
Lights
(red)
Blinks
(red)
Flickers
(red)
Lights
(green)
UC18YRSL
Malfunction in the
battery or the charger
The pilot
lamp
lights or
blinks.
Overheat
standby
Blinks
(red)
UC18YFSL
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
01Eng_DS14DSL_WE.p65 13/10/11, 14:2910