Instruction Manual DVD Player DV-P313U

41
ENGLISH
CHANGING
SETUP MENU
DIGITAL OUTPUT
PCM : Converts to PCM(2CH) 48kHz/16bit
audio.
Select PCM when using 3D sound.
BITSTREAM : Converts to Dolby
Digital BITSTREAM (5.1CH).
Select BITSTREAM when using
the Dolby Digital Audio Output.
NOTE : Be sure to select the correct Digital
Output.
DTS
ON : Outputs DTS BITSTREAM via digital
output only. Select DTS when connecting
to a DTS DECODER.
OFF : Doesn't output DTS signal.
DYNAMIC COMPRESSION
ON : To select dynamic compression.
OFF : To select the standard range.
1
1
Press the SETUP button when in stop
mode.
2
2
Use the UP/DOWN button to select Audio
Options.Then press the ENTER button.
3
3
Use the UP/DOWN button to select the
desired item.Then press the
LEFT/RIGHT button.
NOTES
1
2
1
2
1
2
･ If the selected language is not recorded on the disc, the original pre-recorded language is
selected.
･
Howto make the current Menu disappear and return to Setup Menu during set
up;
Press RETURN button.
Setting Up the Audio Options
ENTER
RETURN
AUDIO OPTIONS
1 Digital Output PCM
2 DTS Off
3 Dynamic Compression On
DV-P313U-E P22-45 01.4.10 10:47 AM ページ 41