Operation Manual

–
10
–
EN
Connection to an audio system
RL
ANALOG
AUDIO OUT
LR
Stereo system
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
• Use a cable which is 3 m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
NOTES
• If output Dolby Digital audio, connect to a Dolby Digital decoder, and set “DOLBY DIGITAL” to “BITSTREAM” for audio out-
put in the setup mode. (See page 17)
• If output DTS audio, connect to a DTS decoder, and set “DTS” to “BITSTREAM” for audio output in the setup mode. (See
page 17)
• If output MPEG audio, connect to a MPEG decoder, and set “MPEG” to “BITSTREAM” for audio output in the setup mode.
(See page 17)
• Unless connected to a Dolby Digital decoder, DTS decoder, or an MPEG decoder, set “DOLBY DIGITAL” and “MPEG” to
“PCM”, and “DTS” to “OFF” for audio output in the setup mode. Playing a DVD using incorrect settings may generate noise
distortion, and may also damage the speakers. (See page 17)
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or
DAT deck.
COAXIALOPTICAL
COAXIALOPTICAL
or
DIGTAL
AUDIO OUT
AUDIO
DVD
Audio Input Jacks
Digital Audio Input
Jacks
Analog Audio Out
Digital Audio Out
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder, DTS decoder or MPEG decoder
Dolby Digital decoder,
DTS decoder,
or MPEG decoder
Method 1 Method 2
CONNECTIONS
E5918AD(EN).qx3 04.4.2 6:49 PM Page 10