Operation Manual

7
EN
FUNCTIONAL OVERVIEW
HITACHI
DV-RM745E
/ I
DISPLAY
2
1
3
45
6
7
89
+10
0
SUBTITLE
ANGLE
REPEAT
A-B REPEAT
CLEAR
AUDIO
SEARCH
MODE
SKIP
MENU
TOP MENU
SETUP
MODE
ZOOM
ENTER
RETURN
DISC
NAVIGATION
OPEN /
CLOSE
SURROUND
2
3
24
26
25
21
20
22
19
18
8
10
12
13
11
14
4
7
5
9
16
15
6
1
17
27
23
Remote Control
1. Open the battery compartment
cover.
2. Insert two AA batteries, with
each one oriented correctly.
3. Close the cover.
Loading the Batteries
Displays During Operation
Power on
Tray open
Tray closed
Power off
When a disc is being
played back
DVD
Loading the Disc
Lights up when the playback
control is activated
No disc inserted or cannot
read
Cautions On Batteries
Use “AA” (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
When inserting the batteries, be careful to do so in
the proper direction, following the and marks
in the remote control unit’s battery compartment.
To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
Do not use two different types of batteries such
as alkaline and manganese.
Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
Details are on pages 8 and 9.
E5918AD(EN).qx3 04.4.2 6:49 PM Page 7