User Guide

PICTURE SEARCH
If you want to skip or repeat a scene during playback, press
g or h.
• Press it again and the VCR will now search at super high
speed. (This function will not work for a NTSC tape).
• Press B (PLAY) to return to normal playback.
QUICK-FIND
This function enables you to search and confirm the contents
of the recorded programme(s) using the index mark.
• Use the remote control for this procedure.
•The tape must be fully rewound.
Press QUICK-FIND to skip to the beginning of next pro-
gramme.
Press B (PLAY) to view at normal speed.
The Quick-Find is cancelled.
NOTES:
• This function will not operate in the Recording mode.
• When you want to cancel the Quick-Find while in
progress, press C.
• When the end of a tape is reached during the Quick-
Find, the tape will automatically rewind to the beginning.
After rewinding finishes, the DVD/VCR will eject the tape.
INDEX SEARCH
• The index mark will be made automatically when I is
pressed. It will also be marked at the starting point of
Timer recording and OTR.
• The index mark is not recorded if
FF
is pressed and
released during recording.
• The time gap between index marks on the tape should
be greater than 1 minute for SP recording and 2 min-
utes for LP recording.
• Use the remote control for this procedure.
Press SEARCH MODE so that the Index Search menu
appears.
Enter the number of recordings you
wish to skip by pressing K or L within
30 seconds.
Press s or B to start index search.
The DVD/VCR begins rewinding or fast forwarding to the
beginning of desired programme. When the preset pro-
gramme is reached,the DVD/VCR will start playback
automatically.
• If you want to go in the forward direction, press B.If
you want to go in the reverse direction, press s.
• If you want to stop search function, press C.
• After index search, the VCR will play the tape automatically.
NOTES:
• Index Search can be set up to 20.
• This function will not operate in the Recording mode.
• Operations must be followed up within 30 seconds,
from step to . Otherwise the Index Search mode
will be cancelled.
•To exit the Index Search mode, press MENU step .
TIME SEARCH
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you wish to skip in order to
reach the point.
• Use the remote control for this procedure.
Press SEARCH MODE twice so that the Time Search
menu appears.
1
2
32
3
2
1
2
1
VCR
Press K or L to select “PIC-
TURE”, then press B.
Press B until the desired mode
(NORMAL, SOFT, or SHARP) is
indicated on the TV screen.
• If the On screen menu still remains, press MENU to
exit the menu.
• Once you select the Picture Select mode, it stays in
effect even after you turn off the DVD/VCR.
4
3
–
18
–
EN
PLAYBACK FUNCTION
Normal Playback
Insert a prerecorded tape. The DVD/VCR will
turn on.
• If the safety tab has been removed, the
VCR will start playback automatically.
• If a cassette is in DVD/VCR, STOP symbol appears in
TV screen when turning on the DVD/VCR(VCR mode).
Tu rn on the TV and select the video channel on the TV.
Begin playback by pressing
B (PLAY).
•Tracking adjustment will be done automatically (Digital
Tracking function) when you start playback. To adjust
the tracking manually, press PROG (K or L) on the
remote or PROGRAM (K or L) on the DVD/VCR.
• When a tape has reached the end, the VCR will rewind
the tape to the beginning and eject the tape automatically.
To stop playback, press C.
• If no corresponding symbols appear on the display when
you press buttons such as B,
II
, g or h, that means
no cassette tape is in the DVD/VCR. Please insert a tape.
Counter Reset
•You can reset the counter by pressing
CLEAR/C.RESET on the remote control.
STILL/SLOW
You can freeze the picture on TV screen by pressing
FF
dur-
ing playback.
•You can advance the picture one frame at a time by
pressing
FF
during the Still mode.
• When the picture begins to vibrate vertically, stabilize the
picture by pressing PROG (K or L) in the STILL mode.
•You can watch in the slow motion by pressing SLOW
during playback or the still mode. (The DVD/VCR mutes
the sound during slow motion. You can control the
speed by pressing g or h.)
• If a noise bar appears on the TV screen, you can
reduce it by pressing PROG (K or L).
• After the DVD/VCR has been in Still/Slow mode for 5
minutes, it will stop automatically to protect the tape
and the video head from damage.
•To return to playback, press B (PLAY).
4
3
2
1
VCR
Auto Repeat Playback
This feature allows you to play a tape over and over.
Press MENU.
Press
K or L to select “SETUP”, then press B.
Press
K or L to select “AUTO REPEAT”, then press B.
Begin auto repeat playback by pressing
B so that “ON”
appears next to “AUTO REPEAT”.
• When in Stop mode, Auto Repeat mode will start auto-
matically.
• If the On screen menu still remains, press MENU to
exit the menu.
•To cancel the Auto repeat mode, press B at step
“OFF” will appear next to “AUTO REPEAT” on the TV
screen.
• Once you select the Auto Repeat mode, it stays in
effect even after you turn off the DVD/VCR.
4
4
3
2
1
VCR
Picture Select
This function enables you to select the picture quality of a tape.
• Use the remote control for this procedure.
Press MENU.
Press
K or L to select “SETUP”,
then press B.
2
1
VCR
Search Functions
MENU
TIMER
SET UP
INITIAL
SET UP
AUTO REPEAT
[
ON
]
PICTURE
[
NORMAL
]
AUTO RETURN
[
ON
]
INDEX 03
H9775BD(EN).qx3 04.5.31 5:20 PM Page 18