Operation Manual

English
9
CHARGER
STANDARD ACCESSORIES
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
䡬 Battery
(BSL1430, BSL1440, BSL1450) (BSL1830, BSL1840, BSL1850)
Optional accessories are subject to change without notice.
Model UC18YRSL UC18YFSL
Charging voltage 14.4 V – 18 V
Weight 0.6 kg 0.5 kg
1 Plus driver bit (No. 2) ................... 1
2 Charger (UC18YRSL or UC18YFSL) ..... 1
DV18DBL
3 Battery ............................................... 2
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
6 Side handle ....................................... 1
1 Plus driver bit (No. 2) ................... 1
2 Charger (UC18YRSL or UC18YFSL) ..... 1
DV14DBL
3 Battery ............................................... 2
4 Plastic case ....................................... 1
5 Battery cover .................................... 1
6 Side handle ....................................... 1
APPLICATIONS
䡬 Drilling of brick and concrete block, etc.
䡬 Driving and removing of machine screws, wood
screws, tapping screws, etc.
䡬 Drilling of various metals
䡬 Drilling of various woods
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (See Fig. 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (See
Fig. 2).
CHARGING
Before using the driver drill, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When the power cord is connected, the charger’s
pilot lamp will blink in red. (At 1-second intervals)
2. Insert the battery into the charger.
Firmly insert the battery into the charger, as shown in
Figs. 3, 4.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously
in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
Table 1
Indications of the pilot lamp
Malfunction in the
battery or the charger
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Blinks
(red)
〈UC18YFSL〉
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights continuously
Lights for 0.5 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights for 0.1 seconds. Does not light for 0.1
seconds. (off for 0.1 seconds)
Before
charging
While
charging
Charging
complete
Charging
impossible
Blinks
(red)
Lights
(red)
Blinks
(red)
Flickers
(red)
Lights
(green)
〈UC18YRSL〉
The pilot
lamp
lights or
blinks.
Overheat
standby
Lights for 1 seconds. Does not light for 0.5
seconds. (off for 0.5 seconds)
Lights continuously
01Eng_DV14DBL_WE.p65 13/10/10, 09:329