DVD RECORDER (DVD RECORDER with VIDEO CASSETTE RECORDER) Instruction Manual Model No. + DV-RF7U VCR Plus and PlusCode are registered trademarks of Gemstar Development Corporation. The VCR Plus system is manufactured under license from Gemstar Development Corporation. + HITACHI AMERICA, LTD. HITACHI CANADA, LTD. HOME ELECTRONICS DIVISION DIGITAL MEDIA DIVISION 900 Hitachi Way Chula Vista, CA 91914-3556 Service Hotline: 1-800-HITACHI 2495 Meadowpine Blvd.
Getting Started Warning TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORTANT SAFEGUARDS FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT NEC – NATIONAL ELECTRICAL CODE S2898A GROUNDING CONDUCT (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) 14.
Getting Started Precaution DVD-RAM, DVD-RW and DVD-R Handling Cautions DVD-Video, CD • Before connecting other components to this recorder, be sure to turn them all off. • Do not move the recorder while a disc is being played, or the disc may be scratched or broken, and the recorder’s internal parts may be damaged. • Do not put a flower vase filled with water or any small metal objects on the recorder. • Be careful not to put your hand into the disc tray.
DVD-R Disc Playback and Recording • An audio disc on which 44.1kHz PCM Audio is recorded. • Plays CD-DA format audio CD-R and CD-RW discs. This unit may not be able to play some CD-R or CD-RW discs due to the condition of the recording. • Once a DVD-R/RW recorded in Video Mode is finalized, it becomes DVD-Video. • You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programs and erasing programs before finalizing.
Getting Started DVD-RAM Disc Playback and Recording • DVD-RAM discs come with or without a cartridge. For this product, we recommend DVD-RAM discs that come with cartridges. • Some cartridges are able to eject the disc inside. Even if you are able to eject the disc, always use the disc with the cartridge to ensure correct operation. • DVD-RAM discs have a Write Protect tab in order to avoid accidental erasure of recorded data.
Setting Up the Language Features . . . . . . . . .28 Contents Setting Up the Audio Options . . . . . . . . . . . .29 Setting Up the Display (Video) Options . . . . .30 ◆ Getting Started Auto Channel Memory . . . . . . . . . . . . . . . . . .32 Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Channel Add/Delete . . . . . . . . . . . . . . . . . . .33 IMPORTANT SAFEGUARDS . . . . . . . . . . . . 3 Guide Channel Setup . . . . . . . . . . . . . . . . . .34 Precaution . . . . . . . .
Getting Started Photo CD Playback . . . . . . . . . . . . . . . . . . . .54 Viewing the Menu Functions for a Disc . . . . .76 Playing back MP3 CD . . . . . . . . . . . . . . . . . .55 Viewing Disc Navigation Screen (title list) . . .78 Using P in P . . . . . . . . . . . . . . . . . . . . . . . . . .56 Playing a Disc Navigation Entry . . . . . . . . . .79 *VCR Playback Renaming a Disc Navigation Entry . . . . . . . .80 Playing the VCR . . . . . . . . . . . . . . . . . . . . . .
Time Slip and Picture In Picture (P in P) General Features High quality progressive scan Progressive scanning provides high resolution and flicker free images. The 10-bit 54-MHz DAC, 2D Y/C Separating circuitry and Time Base Corrector processor technology provide you with the highest image playback and recording quality. (See pages 18~19.) High quality digital audio and video recording and playback Record up to about 12-hour images with a double sided 9.
Getting Started Before Reading the Instruction Manual Make sure to check the following matters before reading the instruction manual.
Step 3 Recording Step 4 Playing You can select the title you want to play in a displayed menu and then immediately start playback. A DVD consists of sections, called titles, and sub sections, called chapters. Finalizing & Playing on other DVD components To play your DVD on other DVD components, finalizing may be necessary. First, finish all editing and recording operations, then finalize the disc.
Getting Started Description Front Panel 1 5 6 7 8 9 2 : 3 ; < 1 2 3 4 5 9 : ; < = > ? @ A B C DVD DECK DVD OPEN/CLOSE BUTTON VCR DECK VCR EJECT BUTTON POWER BUTTON Press to turn the power on and off. (As to the indication of the Operate switch, “I” shows ON and “Í” shows electrical power stand-by.
Rear Panel Getting Started 1 1 2 3 4 5 6 S-VIDEO OUT JACK AUDIO OUT R/L JACKS DIGITAL AUDIO OUT JACK (OPTICAL) DIGITAL AUDIO OUT JACK (COAXIAL) COMPONENT VIDEO OUT JACKS LINE OUT AUDIO R/L JACKS 7 8 9 : ; 2 3 45 6 7 8 9 : ; LINE OUT VIDEO JACK LINE IN 1 VIDEO JACK LINE IN 1 AUDIO R/L JACKS RF OUT TO TV JACK RF ANTENNA INPUT JACK Tour of the Remote Control 1 C 2 D 3 /I DVD AUDIO 4 5 6 7 8 9 DVD DISPLAY DVD CH 100+ PLAY LIST MENU INPUT MAIN MENU 1 2 3 4 5 6 7 8 9 CANCEL E F G
Getting Started ; TIMER Button Used to preset the timer for programmed recording. R REC Button Use to make a recording on DVD-RAM/-RW/-R discs. < PLAY Button = REVERSE Button > MANUAL SKIP Button Pressing this button during playback will skip to a scene 30 seconds forward. S DIRECTION Buttons (UP/DOWN or LEFT/RIGHT Buttons) ? TOP MENU/DISC NAVIGATION Button Use this to enter the View Recoding list/disc menu. V TV CHANNEL Buttons To select a TV channel.
Connecting & Setting Up Quick Overview A Quick Overview presented in this guide will give you enough information to start using the recorder. 4 Step 2 : Connecting the Antenna Cable 4 Step 3 : Connecting the Video Cable 4 Step 4 : Connecting the Audio Cable 4 Step 5 : Connecting External Devices 4 Step 6 : Connecting the Power Cord 4 Step 7 : Preparing the Remote Control • • • • • • • • Quick Overview . . . . . . . . . . . . . . . . 15 Unpacking . . . . . . . . . . . . . . . . . . . .
Step 1: Unpacking Method 1: Antenna + DVD RecorderVCR + TV: No Cable box You can record non-scrambled channels by selecting the channel on the DVD Recorder-VCR. Also use this Method if you watch channels without cable box. Connections Accessories Check for the supplied accessories below. • Video/Audio Cable • RF Cable for TV • Remote Control • Instruction Manual • Batteries for Remote Control (AA Size) Dispose of batteries according to local environmental regulations.
Method 3: Antenna + DVD RecorderVCR + Cable box + TV: Cable box with a few scrambled channels You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box. Wall • Compared to standard interlaced video, progressive scan doubles the amount of video beam lines fed to your TV, resulting in a more stable, flicker-free, and clearer image than interlaced video.
Method 2: Connecting to an S-video input jack 1. Connect Component video cables (not supplied) between the COMPONENT VIDEO OUT jacks on DVD Recorder-VCR and COMPONENT VIDEO IN jacks on the TV (or AV amplifier). 2. Make sure that the disc has stopped completely before changing the mode. If nothing is displayed on front panel display, it is 525i/480i Mode. Connections Connect an S-video cable (not supplied) between the SVIDEO OUT jack on DVD Recorder-VCR and S-VIDEO IN jack on the TV (or AV amplifier).
Method 4: Connecting to Component video input jacks (Y, CB/PB, CR/PR) in 525p/480p mode Your TV must support progressive scan input to allow you to watch 525p/480p video output. 1. Connect Component video cables (not supplied) between the COMPONENT VIDEO OUT jacks on DVD Recorder-VCR and COMPONENT VIDEO IN jacks on the TV (or AV amplifier). There are several ways to connect your DVD RecorderVCR. Select the audio connections that best suits you.
Method 2: Connecting to a stereo amplifier with analog input jacks If your stereo amplifier has audio input jacks (L and R) only, use the analog audio out jacks. Method 3: Connecting to an AV amplifier with a digital input jack If your AV amplifier has a Dolby Digital or DTS decoder and a digital input jack only, use this connection. To enjoy Dolby Digital or DTS sound, you must set up the audio settings.
Step 5: Connecting External Devices This allows you to connect your DVD Recorder-VCR to other external devices and view or record their outputs. Method 2: Connecting a Camcorder to the LINE IN 2 jacks You can also use the LINE IN 2 jacks on the front panel of the DVD Recorder. You can record from connected equipment. When an input source is inserted into LINE IN 2 while viewing TV, the input will be switched to LINE IN 2 automatically.
Method 3: Connecting a Camcorder to the DV IN jack Step 7: Preparing the Remote Control If your camcorder has a DV output jack, connect it to the DV input jack of your DVD Recorder-VCR. • If your camcorder has a DV output jack, see page 71 for more information. Install Batteries in the Remote Control Connections • Open the battery cover on the back of the remote. • Insert two AA batteries. Make sure that the polarities (+ and -) are aligned correctly. • Replace the battery cover.
Setting the Remote Control The remote control will work with Hitachi televisions and compatible brands. /I DVD AUDIO DVD DUBBING VCR REC MODE SURROUND follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Hold down the TV POWER button and enter the twofigure code corresponding to the manufacturer of your television, by pressing the appropriate button on remote control.
System Setup On-Screen Menu Navigation The on-screen menus allow you to enable or disable various functions on your DVD Recorder-VCR. Use the following buttons to open and navigate through the on-screen menus. DVD-RAM(VR) Setup Timer Rec. Setup System Clock Set Channel Set Dubbing Language Disc Navigation Audio Playlist Video Disc Manager System Setup MOVE • • • • • • • • • • • • • • On-Screen Menu Navigation . . . . . 24 Auto Clock Set . . . . . . . . . . . . . . . . 25 Manual Clock Set . . .
4 Auto Clock Set Select “Auto Clock Set” using the 34 buttons, then press the 1 or ENTER button. No Disc Setup Timer Rec. Clock Set Auto Clock Set Manual Clock Set This menu is used to set the current time. You need to set the time to use timer recording. 1 With the unit in Stop mode, press the MAIN MENU button. No Disc Setup Timer Rec.
Time Zone Select the time zone of your area using the 34 buttons, then press the 1 or ENTER button. Select Automatic to set the time zone automatically. No Disc Setup Timer Rec. Auto Clock Set Clock Data CH Time Zone Daylight Saving ✓Automatic Atlantic Eastern Central Mountain Manual Clock Set If Auto Setup fails to set the DVD Recorder-VCR’s internal clock by locating a local TV station, follow these steps to set the date and time manually.
5 Set the Clock Use the 21 buttons to select each of the following options, then use the 34 buttons to set each option: 3 • Month – Set the month • Day – Set the day • Year – Set the year • Hour – Set the hour • Minute – Set the minute • AM/PM – Set the AM/PM Select “Channel Set” Using the 34 buttons, move the selection bar to “Channel Set”, then press the 1 or ENTER button to select. DVD-VIDEO Setup Timer Rec.
Setting Up the Language Features 5 Select the desired Language using 34 buttons, then press the 1 or ENTER button. DVD-VIDEO Setup Timer Rec. Language Audio Subtitle Disc Menu If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Title Menu On-Screen Menu ✓Original English Français Deutsch Español Disc Menu Italiano Nederlands Korean MOVE 2 Select “Setup” using 34 buttons, then press the 1 or ENTER button.
5 Setting Up the Audio Options Note If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. 1 With the unit in Stop mode, press the MAIN MENU button on the remote. 2 Select “Setup” using 34 buttons, then press the 1 or ENTER button. Setup Timer Rec. Digital Output 1. PCM : Converts to PCM (2CH) 48kHz audio. Select PCM when using the Analog Audio Outputs. 2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).
Setting Up the Display (Video) Options 5 Note This function allows you to set up the TV screen settings. 1 With the unit in Stop mode, press the MAIN MENU button on the remote. You can’t use the Setup functions during playback. 2 Select “Setup” using 34 buttons, then press the 1 or ENTER button. System Setup DVD-VIDEO Setup Timer Rec.
Setting Up the Parental Control 5 Select Password ON/OFF using 34 buttons, then press the 1 or ENTER button. DVD-VIDEO Setup Parental Control Password Off On : Off Timer Rec. Title Menu The Parental Control function works in conjunction with DVDs that have been assigned a rating - which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. Disc Menu MOVE 1 With the unit in Stop mode, press the MAIN MENU button on the remote.
About Change in Password; 1 3 Select “Change Password” using 34 buttons, then press the 1 or ENTER button. • The ‘Enter the password.’ message will be displayed. Select “Channel Set” Using the 34 buttons, move the selection bar to “Channel Set”, then press the 1 or ENTER button to select. DVD-VIDEO Setup Timer Rec. Channel Set Antenna/Cable TV : Cable TV Auto Channel Memory Channel Add/Delete 2 Title Menu Enter the 4-digit password using the 0 to 9 buttons on the remote.
Channel Add/Delete 4 Select “Channel Add/Delete” Move the selection bar to “Channel Add/Delete,” then press the 1 or ENTER button to select. DVD-VIDEO Setup Use this feature if Auto Channel Search missed a channel that you would like to add or delete a channel you wish to remove. Timer Rec.
6 Add/Delete Channel Press 1 to move the cursor to select Add, then press 1 if you want to select Delete. Press ENTER to confirm your selection. DVD-VIDEO Channel Add/Delete 2 Select “Setup” 3 Select “Channel Set” Setup Timer Rec. Select Channel : Title Menu Using the 34 buttons, move the selection bar to “Setup”, then press ENTER to select. Using the 34 buttons, move the selection bar to “Channel Set,” then press ENTER to select. 111 Channel is added.
3 VCR Setting Select “VCR” Using the 34 buttons, move the selection bar to “VCR”, then press the 1 or ENTER button to select. DVD-VIDEO Setup If you want your videotapes to play automatically when you insert them, turn Auto Play on. Timer Rec. System VCR Video Input : Line2 Front Display : Auto Title Menu Disc Menu Note ■ Only tapes that are missing the Record Safety Tab will play automatically when inserted. MOVE 4 2 Timer Rec.
6 Select “Auto Repeat” Move the selection bar to “Auto Repeat”. It sets the VCR to play a tape repeatedly [unless a tape control is activated (Stop, Fast Forward or Rewind)]. 3 Select “System” Use the 34 buttons to highlight “System”, then press the ENTER button. DVD-VIDEO DVD-VIDEO Setup Timer Rec. VCR Setup Tape Length : T120 Auto Play : On Auto Repeat : Off Timer Rec.
4 Front Display You can set the Front Panel Display to be bright all the time, dim all the time, dim during power off. Set “Front Display” Move the selection bar to “Front Display”, then press the 1 button to select from the following options: • Auto Dim – Front Panel Display will dim automatically during power off. • Bright – Front Panel Display will be bright all the time. • Dim – Front Panel Display will be dim all the time. DVD-VIDEO 1 2 Setup Open “MENU” Timer Rec.
Before Playing Playback Read the following information before playing a disc. This section introduces basic functions of playback by disc type. Region code (DVD-Video only) Both the DVD Recorder-VCR and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. The Region Number for this DVD Recorder-VCR is described on the rear panel of the DVD Recorder-VCR.
Discs that cannot be played • DVD-Video with a region number other than “1” or “ALL” • 3.9 GB DVD-R Disc for Authoring • DVD-RAM not recorded following the Video Recording Standard • Unfinalized DVD-R recorded on other equipment • PAL discs • DVD-ROM/DVD+RW/PD/MV-Disc/DiVX Video Disc, etc. • Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I Note Playback ■ This DVD Recorder-VCR can only operate with discs that are compatible with DVD-RAM Standard Version 2.0.
Playing a Disc /I DVD AUDIO DVD DUBBING VCR REC MODE SURROUND DISPLAY Press the OPEN/CLOSE button. 2 Place a disc gently into the tray with the disc’s label facing up. 3 Press OPEN/CLOSE button to close the disc tray. 4 Press the STOP button to stop playback. DVD CH 100+ PLAY LIST MENU INPUT MAIN MENU MARKER OPEN/ CLOSE VCR 1 1 2 3 4 5 6 7 8 9 CANCEL 0 VCR Plus+ TIMER TIME SLIP P in P PLAY • The DVD Recorder closes the disc tray and plays the disc automatically.
Using the Search & Skip Functions Slow Motion Play/ Step Motion Play Searching through a Chapter or Track Slow Motion Play (DVD-VIDEO/DVD-RAM/DVD RW/ DVD-R) During play, press the SEARCH 6 or 5 button on the remote control. The playback speed will change as follows. DVD-VIDEO/ DVD-RAM/DVD-RW DVD-R AUDIO CD(CDDA) PLAY>FF1/FR1>FF2/FR2> FF3/FR3>FF4/FR4>FF5/FR5> FF6/FR6 PLAY>FF1/FR1>FF2/FR2> FF3/FR3 During pause mode, press the SEARCH 6 or 5 button on the remote.
Manual Skip DVD-RAM DVD-R RW VIDEO RW VR Skipping 30 seconds forward and playing (manual skip): Each press of the M. SKIP button during playback of recorded TV program will skip to scene approx. 30 seconds ahead. 1 Playback Note Press the M. SKIP button on remote control during playback. ■ Manual Skip can be performed only during normal playback. ■ When the time set is less than a remaining time of a current title: The next title is played from the beginning.
About FUNCTIONS button DVD-R Title/Chapter/Time/Audio/Repeat/Zoom DVD-R(V) The FUNCTIONS button allows you to easily search for a desired scene by accessing title, chapter, track and time. You can also change the subtitle and audio settings and set some features including Repeat, Angle and Zoom. Title 2/2 Chapter 1/1 Time Audio 00:00:24 *** d D 2CH Repeat Off Zoom Off MOVE CHANGE Press the FUNCTIONS button on the remote control during playback.
Repeat Play Using Repeat Play (For DVD-VIDEO/DVD-RAM/DVDRW/DVD-R) (DVD-VIDEO only supports chapter repeat.) 1 Press the FUNCTIONS button during playback. Using Repeat Play (For Audio CD/MP3) 1 Press the FUNCTIONS button during playback. Repeat is highlighted. 2 Press the ENTER button. 3 Press the 34 button to select the Track or Disc you want to playback repeatedly. For MP3 discs, you can select Track, Folder or Disc. 4 Press the ENTER button.
Using the A-B Repeat Function For DVD-VIDEO/DVD-RAM/ DVDRW/DVD-R 1 Press the FUNCTIONS button during playback. Moving to a Scene Directly You can find the desired scene easily using the FUNCTIONS button. 1 Press the FUNCTIONS button during playback.
4 If you want to move to a desired time, enter the time in the sequence of hour, minute, and second using the numeric buttons and then press the ENTER button. DVD-VIDEO Title Selecting the Subtitle & Audio Language 1/7 Chapter 2/13 Time 00:05:08 Subtitle Audio Off ENG d D 2CH Audio languages or subtitle languages may not work depending on disc type. It is available during playback only.
Selecting the Audio language 1 Press the FUNCTIONS button during playback. Changing the Camera Angle DVD-VIDEO Title 1/7 When a DVD contains multiple angles of a particular scene, you can select the Angle function. Chapter 2/13 Time 00:08:00 Subtitle Off Audio ENG d D 2CH Repeat Off Angle 1/1 1 Press the FUNCTIONS button during playback. 2 Use 34 to select Angle and use 21 button to select the desired camera angle.
Marking with DVD-R, DVD-RW(VIDEO) and DVD-VIDEO discs Using Markers / Bookmarks DVD-RAM • The screen will display “Bookmark” in place of “Marker” if you are playing a DVD-R, DVDRW(VIDEO) and DVD-VIDEO. • Up to 10 scenes can be marked. • Removing disc will delete all bookmarks. DVD-R RW VIDEO RW VR DVD VIDEO Set marks at scenes you want to see again so that you can start playback from the marked position.
Canceling a Marker 1 Zooming-In Press the MARKER button Marker 1 2 - - - - - - - - - N:2 1 Press the FUNCTIONS button during playback. 1 DVD-VIDEO Title Chapter Time Subtitle MOVE PLAY CANCEL RETURN Audio 3 3/13 00:10:55 Off ENG d D 2CH Repeat Off Angle 1/1 Zoom Off MOVE 2 1/7 SELECT Press 21 buttons to select a marked scene you want to delete. Press the CANCEL button to delete the selected marker.
Check Remaining Time 1 Press the DISPLAY button on the remote control. The following information will be displayed. (Current deck status, recording speed, remaining time, input channel, current time.) VCR Playback DVD STOP STOP 0:14:54 0:00:15 -- SP Rem --:-- Rem --:-- CH 111 CH 111 --- --- -.
Playing Back an Audio CD (CDDA) Audio CD (CDDA) Screen Elements 1 34: Select a track (song). 2 1: Play back the selected track (song). 3 ENTER button: Play back the selected track (song). 4 9 button: Play back the next track. 5 : button: Returns to the beginning of the current track when pressed during playback. If you press this button within three seconds after playback starts, the previous track will be played.
• Intro : Play Option Mode • Playlist : 1 Press the FUNCTIONS button during playback. Repeat mode will be highlighted. CD Func. The first 10 seconds of each track is played. If you press the 1 button during Intro play, Normal Play will be performed from the track currently playing. When Intro Play is completed, Normal Play is performed. The Playlist playback option allows you to select the order in which you want tracks to play.
To Program Tracks 4 Press the ENTER button. The Playlist screen will appear. Select tracks in the order in which you want them to play using the 34 buttons. Press the ENTER button. CD Func. Music Repeat : off Play Option : Playlist 00:00 You can register a maximum 30 tracks in the playlist. 1 Press the FUNCTIONS button. Repeat Mode will be highlighted. 01. TRACK 1 01. P_TRACK 1 02. TRACK 2 02. P_TRACK 2 03. TRACK 3 03. P_TRACK 3 04. TRACK 4 04. P_TRACK 4 05. TRACK 5 06.
Photo CD Playback 1 Insert a photo CD (JPEG) into the disc tray. 2 The screen shown below will appear automatically. (Press the PLAY button to switch to slide show mode.) JPEG Photo Index 2/ 5 Slide Show ###/ s3L kif_0024 s3L kif_0 ### Page 1/ 1 Playback MOVE SELECT RETURN To see the next 6 pictures, press the 9 button. To see the previous 6 pictures, press the : button. 3 Select Photo using the 34 buttons, then press the ENTER button.
Playing back an MP3 CD 1 Insert an MP3 CD into the disc tray. • The MP3 menu is displayed and the tracks (songs) are played back. MP3 Func. 4 RETURN button: Moves to the folder to which the current song belongs. 5 9 button: Plays the next track. 6 : button: Returns to the beginning of the current track when it is pressed during playback. If it is pressed again, the DVD Recorder-VCR plays back the previous track. Music Repeat : off Play Option : Normal 02:45 01.
Using P in P Deactivating P in P 1 The P in P function allows you to view a sub screen together with the main screen in DVD mode. You can watch both DVD and TV together. ■ P in P does not work in VCR mode. Note Press the P in P button during playback of DVD disc. • The current disc is played back on the P in P screen located at the bottom of the screen. Playback 1 Switching between the P in P and main screens 1 Press the P in P button again. • The main and P in P screens will be switched.
Playing the VCR To play a standard VHS videotape, just insert it into the VCR deck and press the PLAY button. You can turn on the Auto Play to enable the VCR deck to play automatically when you insert a videotape that is missing the Record Safety Tab. See pages 35~36. Tracking The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks.
Special VCR Playback Features While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance, Search, Slow motion, etc. Press the PLAY button again to resume normal playback. Pause 2 Frame Advance 3 Fps/Review Playback 1 In Play mode, press PAUSE button to still a single frame. In the pause mode, press 9 SKIP button to advance to the next frame.
Variable Search System Press the FUNCTIONS button to display the search screen in the stop or playback mode. When a program is recorded, the starting point is given an Index mark for easy location. However, the VHS Index Search System (VISS) cannot recognize index marks made by old VCRs. If the VCR has trouble finding a mark, it is probably because the cassette was recorded on a VCR without VISS. If you want to index two programs in a row, set your VCR to stop, then start recording each program.
Recording Before Recording This unit can record on various types of discs. Before recording, read the following instructions and select the disc type according to your preference. Recordable discs This section shows various DVD and VCR recording methods. This recorder can record on the following discs. DVD-RAM DVD-RW DVD-R • DVD-RWs and DVD-RAMs are rewritable. • DVD-Rs are non-rewritable. Recording Note • Before Recording . . . . . . . . . . . . . .
Recording Format DVD-RW (VR mode)/-RAM When you insert an unused disc, the following message appears. Since available functions differ depending on the disc type, select a disc that best fits your preferences. DVD-RW: When unused DVD-RW disc is first inserted, the message "Do you want to intialize this disc" will be displayed. If you select Yes, the disc will be formatted in Video mode. If you want to change the mode, refer to Formatting a Disc on page 95. Setup Timer Rec.
Using VCR Plus+ codes to make timer recordings 5 Press the ENTER button. • The Timer Record Input items are displayed. DVD-RAM(VR) 00:00 SP No 01 CH 12 To -----02 Date 10/17 Start 05 : 00 Type Once Entering VCR Plus+ codes is an easy way of programming the unit for recording. You can find these codes in TV Guides and magazines. 1 Scheduled Record List No.
Recording the current channel you are watching DVD-RAM DVD-RW 1 Press the OPEN/CLOSE button and place a recordable disc on the disc tray. 2 Press the DVD CHANNEL 34 button to select the channel you want to record. 3 Press the REC MODE button on remote control, to select the recording speed (quality). • XP (High, approx. 1 hour) # SP (Standard, approx. 2 hours) # LP (Low, approx.
Making One Touch Recording (OTR) DVD-RAM DVD-RW Making a Timer Recording One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 6 hours at the touch of a button. 1 Use the DVD CHANNEL button or numeric buttons to select the channel to record. • CATV channel: 1 to 125 • TV channel: 2 to 69 2 Start Recording. 3 Activate OTR. DVD-RAM DVD-RW DVD-R Follow the instructions on page 63 to begin recording.
2 Set timer recording option. • The Timer Recording screen is displayed. Fill the input items using the DIRECTION buttons. 21: Moves to the previous/next item, 34: Sets a value. • TO : Select the media to record DVD or VCR. • SOURCE : The video input source (L1 or L2), or the broadcasting channel you want to make a timer recording from. • Date : Set the recording day. • Start/End Time : Start and end time of the timer recording. • Type (Recording cycle). Once : Records once.
4 Editing Timer Record List Press the 34 button to select the number of the timer recording you want to edit, and then press the ENTER or 1 button. • The Edit and Delete items are displayed. DVD-RAM(VR) DVD-RAM DVD-RW DVD-R Follow these directions to edit the timer record list. No. To Source Date 01 DVD CH 08 06/28 01:17PM 02:30PM Once Edit XP 02 -- --- --/-- Delete -- Editing the settings for a timer recording 1 2 MOVE 5 Press the MAIN MENU button. Setup Timer Rec.
Deleting a Timer Recording Entry DVD-RAM DVD-RW DVD-R 5 • You will be prompted with the delete confirm message such as ‘Do you want to delete No.02?’. 6 7 Press the MAIN MENU button. 2 Press the 34 button to select Timer Rec., and then press the ENTER or 1 button. 3 Press the 34 button to select scheduled Record List, and then press the ENTER or 1 button.
Satellite Link Recording 5 Connect a device on which reservation standby is possible, such as a CS tuner, to the LINE IN 1 jacks on the back of this DVD Recorder-VCR: You can then start recording, interlocking with the beginning of the broadcast program. Set the connected device to reservation standby in advance. Note 1 Press the MAIN MENU button. 2 Use the 34 buttons to choose “Timer Rec.”, and then press the ENTER button.
Watching the Images Being Recorded (Time Slip) DVD-RAM This function allows you to watch the recently recorded 10-second images on the P in P screen while a recording is in progress. 1 Follow these directions to record onto a disc or a tape from External Devices. Connect the Line out jack of your External Devices to the Line IN jack on the front or rear of your DVD Recorder-VCR using Audio/Video Cable.
Playing while Recording (Chasing Play) DVD-RAM While recording one program, you can simultaneously play back a previously recorded program. You can also play back from the start of the program currently being recorded. During recording: 1 Press the PLAY button. • The DVD Recorder-VCR will play back the program currently being recorded, starting at the beginning. • If the DVD Recorder-VCR played some program immediately before starting to record, it will play from the beginning of that program.
Recording through DV jack DVD-RAM DVD-RW Basic VCR Recording DVD-R Follow these directions to record onto a disc the output of a camcorder that has a DV output jack. 1 Connect the DV output jack of your camcorder to the DV input jack on the front of your DVD RecorderVCR using a DV cable. Before starting 1. Check TV channel and Antenna connections. 2. Check the remaining time on the tape. You can record a TV show in progress by inserting a blank tape and pressing the REC button.
Special Recording Features While a recording is in progress, you can watch a different channel, watch a different media, or add recording time in 30-minute increments. 1 Watch a different media during recording You can watch DVD during VCR recording or watch Video tape during DVD recording. • During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD and start playback. • During DVD recording, insert a Video tape in the VCR deck.
2 Dubbing to DVD or VCR If you want to dub from Dubbinglist, choose “Edit Dubbinglist”. • To dub from “Edit Dubbinglist”, you need to make a Dubbinglist. To make and select a “New Dubbinglist” (See pages 86~87). • Choose “Direct dubbing” if you wish to dub all the contents on DVD disc from beginning to end. DVD-RAM DVD-RW DVD-R You can dub from DVD to VCR, or from VCR to DVD. Press MAIN MENU button and select Dubbing. DVD-RAM(VR) Setup Timer Rec.
3 Select the Dubbinglist you want to dub, using the 34 buttons, and then press 1 button. To dub from play list, select “Dubbing”. • Note that only “Direct dubbing” or one-button dubbing is possible on finalized DVD-RW (VR mode) discs. • In addition, only one-button dubbing is possible on DVD-R/DVD-RW (Video mode) and finalized DVD-RW (Video mode) discs. DVD-RAM(VR) VCR to DVD Before You Begin 1. Insert a recordable DVD disc. 2. Choose the record mode of DVD. 3. Insert a VHS videotape.
4 Press Enter button to choose the list you want to dub from. DVD-RAM(VR) VCR-->DVD No. Start End 01 -00:27:09 02 --:--:-- Edit -00:25:31 --:--:-- For immediate dubbing (one-button dubbing) Dubbing will start from the position where the DUBBING button is pressed either during playback or in the stop status. 1 Insert the VHS tape you want to dub. Insert Recordable DVD disc. • If you want to dub all content, select “Dubbing All”. 2 To dub Dubbinglist, select “Dubbing”.
Editing Viewing the Menu Functions for a Disc DVD-RAM DVD-RW DVD-R There are a variety of menu functions depending on the disc type. Press the MAIN MENU button. No Disc No Disc Setup Timer Rec. Setup System Clock Set Setup Timer Rec. Channel Set Language Audio Video Parental Control MOVE SELECT RETURN EXIT Editing DVD-VIDEO • Viewing the Menu Functions for a Disc . . . . . . . . . . . . . . . . . . . . . . . 76 • Viewing Disc Navigation Screen (title list) . . . . . . . . . . . . . . . . . . .
CD DVD-RW(V) CD DVD-RW(V) Setup Setup Timer Rec. System Setup Clock Set Timer Rec. Setup Timer Rec. Channel Set Language Channel Set Language Audio Disc Navigation Audio Video Disc Manager Video SELECT Parental Control RETURN EXIT MOVE JPEG, MP3 System Setup Setup Timer Rec. Clock Set Channel Set Language Timer Rec. Setup Setup Timer Rec.
Viewing Disc Navigation Screen (title list) DVD-RAM DVD-RW 2 Press the 34 button to select Disc Navigation, and then press the ENTER or 1 button, or press the TOP MENU/DISC NAVIGATION button on the remote control. • The Disc Navigation screen is displayed. 1 3 4 2 5 6 DVD-R DVD-RAM(VR) You can play back the recorded titles, edit a title name, edit record list entries and lock or unlock the record list. Disc Navigation No.
Playing a Disc Navigation Entry DVD-RAM DVD-RW DVD-R 4 Press the 34 button to select Play, and then press the ENTER button. • The selected entry (title) will be played back. ■ You can also play back a recorded program by pressing the FUNCTIONS button and using the Note title, chapter or time items. Follow these directions to play back an entry from the Disc Navigation screen. 1 Press the MAIN MENU button. DVD-RAM(VR) Setup Disc Navigation Disc Navigation Timer Rec.
4 Renaming a Disc Navigation Entry Press the 34 button to select Rename, and then press the ENTER button. • The Rename screen is displayed. DVD-RAM(VR) DVD-RAM DVD-RW DVD-R Follow these directions to rename a Disc Navigation entry, i.e., to edit the title of a recorded program. A B C D E a b c d e 1 2 3 4 5 F G H I J f g h i j 6 7 8 9 0 K L M N O k l m n o - _ + = .
4 Deleting a Disc Navigation Entry Press the 34 button to select Delete, and then press the ENTER button. • You cannot delete a protected entry. If you want to delete a protected entry, select “OFF” in the protection menu. DVD-RAM(VR) DVD-RAM DVD-RW Disc Navigation DVD-R Do you want to delete? (Related playlists may be deleted.) Follow these directions to delete an entry from the Disc Navigation screen. JUN/28/2004 01:09AM CH46 JUN/28/2004 01:09 AM LP MOVE 1 Press the MAIN MENU button.
4 Locking a Disc Navigation Entry Press the 34 button to select Protection, and then press the ENTER button. • You will be prompted with the confirmation message ‘Title Protection:’. DVD-RAM(VR) DVD-RAM DVD-RW Disc Navigation DVD-R Title Protection: Follow these directions to lock an entry if you want to protect it from unexpected deletions. JUN/28/2004 01:16AM CH51 JUN/28/2004 01:16 AM SP MOVE 1 2 Off RETURN Press the MAIN MENU button.
Deleting any Section of Disc Navigation Entry 4 Press the 34 button to select Edit, and then press the ENTER button. The Edit Program is displayed. 1 Playback bar 2 Playtime 3 Section deletion start point window and time 4 Section deletion end point window and time DVD-RAM(VR) Edit Title DVD-RAM DVD-RW Title No.05 Follow these directions to delete any section of Disc Navigation entry. Start Start 1 Press the MAIN MENU button.
7 Press the ENTER button at the end point. 8 The image and time at the end point are displayed the end point window. DVD-RAM(VR) Start Start JUN/28/2004 01:16AM CH51 JUN/28/2004 01:16 AM End 00:00:00 00:03:50 9 DVD-RAM Edit Title Title No.05 MOVE Displaying a List of Scenes (Scene Navigation) Delete End SELECT 00:03:50 Return RETURN RW VR • Scene Navi. allows you to display a list of the scenes recorded on DVD-RAM disc using a DVD video camera/recorder. • Scene Navi.
Skipping to a Desired Time and Playing (Time Navigation) 4 Use the 2 1 buttons to select the desired scene, and then press the ENTER button. • Each press of 2 1 will move the cursor in oneminute units. • Playback will start from the selected scene. DVD-RAM(VR) Time Navigation DVD-RAM Time Navi. allows you to select desired scenes in oneminute units from a list of recorded programs (Disc Navigation), and then play them.
Creating a Playlist Entry 4 Select the start point of the section from which you want to create a new scene, and then press the ENTER button. DVD-RAM(VR) Make Scene Scene No.001 Start DVD-RAM DVD-RW Start Title : 5/13 VR mode Follow these directions to create a new playlist entry from a recorded title. New Playlist DEC/01/04 12:45 AM MOVE 1 2 00:00:00 00:00:13 End Make End SELECT 00:03:50 Return RETURN Press the MAIN MENU button when the disc is stopped.
7 Press the ENTER button to select END point. • The image and time at the end point are displayed on the End window. • The yellow-colored selection bar moves to the Make item. DVD-RAM(VR) Editing a Playlist Entry Make Scene Scene No.001 DVD-RAM DVD-RW VR mode Start Start Title : 5/13 New Playlist DEC/01/04 12:45 AM MOVE 8 9 SELECT End 00:01:05 00:01:35 Make End 00:01:34 Follow these directions to play or edit (rename, edit scene, dubbing and delete) the newly created playlist entries.
5 Press the 34 button to select a function to use, and then press the ENTER button. • Play: Plays the selected entry. • Rename: Renames the title of the selected entry. This function is the same as the Rename item of Edit Disc Navigation menu. • Edit Scene: Edits scenes of the selected entry. • Dubbing: Dubs the selected entry. • Delete: Deletes the selected entry from the list. Renaming Playlist Entries Follow these directions to rename a playlist entry, i.e., edit the title of a playlist entry.
5 Editing Scene for a Playlist Entry Press the 34 button to select Edit Scene, and then press the ENTER button. • The Edit Scene screen is displayed. DVD-RAM(VR) Scene No. Edit Scene 1/ 4 Playlist No. 2 Play Modify DVD-RAM DVD-RW VR mode 01 00:00:21 02 00:00:01 03 04 00:00:01 05 00:00:00 00:00:01 Move Follow these directions to edit scenes for a playlist entry. Add MOVE 1 Press the MAIN MENU button when the disc is stopped.
B. Modifying a Scene (Replacing a Scene) 5 Press the ENTER button at the end point of the scene. DVD-RAM(VR) Modify Scene Scene No.004 1 Press the DIRECTION buttons to select the scene you want to modify, and then press the ENTER button. Start Start Title : 5/13 00:00:06 00:03:48 2 JUN/28/2004 02:14 AM JUN/28/2004 02:14 AM Press the DIRECTION buttons to select Modify, and then press the ENTER button.
3 Press the DIRECTION buttons to select the position where you want to move the selected scene, and then press the ENTER button. 4 Press the 34 button to select Start, and then press the ENTER button. • The image and time at the start point are displayed on the Start window. • The selected scene is moved to the new position. DVD-RAM(VR) DVD-RAM(VR) Scene No. Add Scene Edit Scene 1/ 4 Scene No.005 Playlist No.
E. Deleting a Scene from the Playlist 1 Press the DIRECTION buttons to select the scene you want to delete, and then press the ENTER button. 2 Press the 34 buttons to select delete, and then press the ENTER button. Dubbing a Playlist Entry to the VCR DVD-RAM DVD-RW VR mode 1 Press the MAIN MENU button when the disc is stopped. 2 Press the 34 button to select Playlist, and then press the ENTER or 1 button.
Deleting a Playlist Entry from the Playlist 5 Press the 34 button to select Delete, and then press the ENTER button. • You will be prompted with the delete confirmation message ‘Do you want to delete?’. DVD-RAM(VR) Edit Playlist Do you want to delete? DVD-RAM DVD-RW VR mode 1 Press the MAIN MENU button when the disc is stopped. 2 Press the 34 button to select Playlist, and then press the ENTER or 1 button.
5 Disc Manager Press the DIRECTION buttons to select Save, and then press the ENTER button. • A disc name is given to the disc. DVD-RAM(VR) Setup Timer Rec. Disc Name Disc Manager :VIDEO Disc Protection : Not Protected Disc Format DVD-RAM DVD-RW Dubbing DVD-R Delete All Titles Disc Navigation Editing Disc Name Cartridge Protection Info Playlist Disc Manager Follow these directions to give a name to a disc. 1 2 MOVE SELECT RETURN EXIT Press the MAIN MENU button when the disc is stopped.
3 Press the 34 buttons to select Disc Protection, and then press the ENTER or 1 button. DVD-RAM(VR) Setup Timer Rec. Disc Name Disc Manager Use these instructions to format a disc. The cartridge write protect tab should be set to the unprotect position. The disc protection should also be cleared.
Press the 21 buttons to select Yes, and then press the ENTER button. 4 Delete All Titles • The disc is formatted. DVD-RAM DVD-RW DVD-RW DVD-R Follow these instructions to delete all titles. You will be prompted with the confirmation message “Choose the recording format for DVD-RW”. DVD-RW(V) Setup Timer Rec. Disc Manager Disc Name Press the MAIN MENU button with the disc stopped. 2 Press the 34 button to select Disc Manager, and then press the ENTER or 1 button.
Cartridge Protect Info (DVD-RAM) Disc Protect allows you to protect discs from disc formatting and program deletion due to unintended operations. The cartridge write protect tab should be set to the unprotect position to be able to make a recording to a DVD-RAM disc. 1 Press the MAIN MENU button with the disc stopped. 2 Press the 34 button to select Disc Manager, and then press the ENTER or 1 button. 3 Press the 34 buttons to select Cartridge Protection Info, and then press the ENTER or 1 button.
Press the 21 buttons to select Yes, and then press the ENTER button. • The disc is finalized. • When finalization is complete, the tray will open. ■ Once a disc is finalized, you cannot delete entries from the record list. Note ■ After being finalized, the DVD-R operates in the same manner as a DVD-Video. ■ Depending on the kind of disc, the displayed screen may be slightly different. ■ Finalizing will be taken few minutes.
Press the 21 buttons to select Yes, and then press the ENTER button. • The disc will be unfinalized. • A DVD-RW can be finalized or unfinalized in Video mode. Mark Operation Finalize DVD-VIDEO(RW) Same as DVD-Video Unfinalize DVD-RW(V) Additional recording, protection and deletion are possible. • A DVD-RW can be finalized or unfinalized in VR mode. Mark Operation Finalize DVD-RW(VR:F) Additional recording, deletion, editing, and protection are impossible.
Reference Troubleshooting (DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R) 4 Troubleshooting 4 Problems and Solutions (VCR) 4 Reference Specifications • Troubleshooting (DVD-VIDEO/ DVD-RAM/DVD-RW/DVD-R) . . . . . 101 • Troubleshooting . . . . . . . . . . . . . . . . 102 • Problems and Solutions (VCR) . . . . 103 • Specifications . . . . . . . . . . . . . . . . .
Troubleshooting (DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R) If your product malfunctions, go through the check points below before contacting a Hitachi authorized service center. No power. • Check whether the power cord is securely plugged into power outlet. • Did you press the power button of your DVD Recorder-VCR. Logo is displayed for a while when the power turns on. The DVD Recorder-VCR requires some time to be initialized after it is turned on. Cannot record TV programs.
Troubleshooting You cannot use the operation or function due to one of the following reasons: (1) Your DVD disc does not support the feature (for example, angles) (2) You've requested a title, chapter, or scan time that is out of the correct range. Play mode settings are different from the settings configured with the setting menu. The disc does not support all the selected functions. In this case, some settings you configure on the setting menu may not work properly. Cannot change the aspect ratio.
Problems and Solutions (VCR) Before contacting a Hitachi authorized service center, perform the following simple checks. Problem Explanation/Solution No power ◆ Check that the power plug is connected to a wall outlet. ◆ Have you pressed the POWER button? You cannot insert a video cassette ◆ A video cassette can only be inserted with the window side up and the safety tab facing you. A television program was not recorded ◆ Check the DVD Recorder-VCR antenna connections.
Specifications General Power requirements 120V AC, 60 Hz Power consumption/Standby power (W) 45 Watts/5.1 Watts Weight Approx. 5.3 kg (11.6 lb) Dimensions Approx. 430 mm (W) x 333 mm (D) x 84 mm (H) [Approx. 16.9 in (W) x 13.1 in (D) x 3.3 in (H)] (excluding projections) Operating temp. +5°C to +40°C (+41°F to +104°F) Operating humidity 10%–80% RH (no condensation) Video 1.0 Vp-p at 75 Ω load, sync negative Max.
Conexión del cable de antena Existen varias formas de conectar su videograbadora con DVD. Seleccione, entre las siguientes, la conexión de antena más adecuada a sus necesidades.
Método 3: Antena + Videograbadora de DVD + Adaptador para cablevisión + Televisor: Adaptador para cablevisión con unos pocos canales codificados Usted podrá grabar canales no codificados seleccionándolos en el adaptador para cablevisión. No podrá grabar canales codificados que necesiten un adaptador para cablevisión.
Método 2: Conexión a una toma de entrada de vídeo S Conecte un cable de vídeo S (no suministrado) entre la toma S-VIDEO OUT de la videograbadora con DVD y la toma S-VIDEO IN del televisor (o amplificador de audio/vídeo). • Usted podrá disfrutar de imágenes de gran calidad. Método 3: Conexión a tomas de entrada de vídeo de componentes (Y, CB/PB/ CR/PR) en el modo 525i/480i 1.
Método 4: Conexión a las tomas de entrada de vídeo de componentes (Y, CB/PB, CB/PB) en el modo 480p Su televisor deberá ser compatible con la entrada de exploración progresiva para permitirle contemplar la salida de vídeo de 480p. 1. Conecte cables de vídeo de componentes (no suministrados) entre las tomas COMPONENT VIDEO OUT de la videograbadora con DVD y las tomas COMPONENT VIDEO IN del televisor (amplificador de audio/vídeo). 2. Presione el botón Progresive del panel frontal. Se visualizará el mensaje.
Ajuste de los canales guía Configure estos canales guía a fin de poder utilizar los códigos de VCR Plus+ para la grabación con temporizador. Antes de iniciar la configuración, prepare una tabla que indique los canales, los nombres de las emisoras, y los canales guía. 1 Abra “MENÚ”. Con el DVD en el modo de parada, presione el botón MAIN MENU. Seleccione “Configurac.” 3 Seleccione “Ajuste de Canales”. 4 Seleccione “Ajuste de VCR Plus+”. 5 6 Nota 1 Presione el botón OPEN/CLOSE.
■ No mueva su videograbadora con DVD mientras esté reproduciendo, porque podría dañar el disco. ■ Cerciórese de presionar el botón OPEN/CLOSE para abrir o cerrar la bandeja del disco. ■ No empuje la bandeja del disco mientras esté abriendo o cerrándose, ya que podría causar el mal funcionamiento de la videograbadora. ■ No coloque materiales extraños en la bandeja del disco. ■ Algunas funciones pueden trabajar de forma diferente o estar inhabilitadas dependiendo del tipo de disco.
Marcación con un disco DVD-R, DVD-RW(VIDEO) c DVD-VIDEO • Si reproduce un disco DVD-RAM/DVD-RW(VR), la pantalla visualizará “Bookmark” en vez de “Marca”. • Usted podrá marcar hasta 10 escenas. Reproducción desde un marcador 1 Presione el botón MARKER durante la reproducción. 2 Presione los botones 21 para seleccionar la escena marcada. Reproducción de la videograbadora Para reproducir un videocasete VHS estándar, simplemente insértelo en la videograbadora y presione el botón PLAY.
Seguimiento El ajuste del seguimiento elimina las líneas blancas que aparecen a veces durante la reproducción debido a ligeras diferencias en las videograbadoras para grabación. Los botones DVD CHANNEL alinearán automáticamente las pistas grabadas con las cabezas de reproducción para resolver este problema. Usted también podrá realizar manualmente el ajuste del seguimiento.
Utilización de los códigos VCR Plus+ para realizar grabaciones con el temporizador La introducción de los códigos VCR Plus+ es una forma muy fácil de programar la videograbadora para grabación. Usted podrá encontrar estos códigos en guías y revistas de televisión. Presione el botón MAIN MENU. 2 Presione los botones 34 para seleccionar Grab. Temp. y después presione el botón ENTER o 1. 3 Presione los botones 34 para seleccionar Ajuste de VCR Plus+ y después presione el botón ENTER o 1.
Contemplación con Navegación de disco DVD-RAM DVD-RW Elementos de edición de la lista de grabación DVD-R 1 • Reproducir: Reproduce la introducción seleccionada. • Camb. Nomb.: Cambia el nombre del título de la introducción seleccionada. • Eliminar: Borra la introducción seleccionada de la lista. • Modificar: Borra la sección deseada. (DVD-RAM/DVD-RW (modo VR) • Proteger: Bloquea o desbloquea la introducción seleccionada. • Nav.
Borrado de una introducción de la Navegación de disco Reproducción con Navegación de disco DVD-RAM DVD-RW DVD-R Para reproducir una introducción de Navegación de disco, realice lo siguiente. DVD-RAM DVD-RW DVD-R Para borrar una introducción de la Navegación de disco, realice lo siguiente. 1 Presione el botón MAIN MENU. 1 Presione el botón MAIN MENU.
Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assistance. Our service "Hot line" operator will direct you to the Hitachi Authorized Service Facility nearest you.
Warranty Limitations Important Notice: The Limited Warranty provided by Hitachi does not cover: A. Cabinet (exterior finish items), Battery packs, Accessories, Lens Cleanings, Head Cleanings, DVD Disc Damage, Video Tape Damage, or Software Modifications. B.
HITACHI LIMITED WARRANTY Hitachi America, Ltd., Home Electronics Division (“Hitachi,”) warrants this component in duration as stated below: Hitachi America, Ltd. Home Electronics Division A Y D L A N O AN . C A . N S I . U ID L A V OT • DVD Products • VCR Products • CAMCORDER Products • AC ADAPTER CHARGER Conditions of Hitachi Limited Warranty These Hitachi Products are warranted to be free of defects in parts and workmanship at the time of purchase by the original owner.
HITACHI CANADA LTD. DIGITAL MEDIA DIVISION HITACHI WARRANTY POLICY HITACHI VIDEO PRODUCTS are guaranteed to be free from defects in workmanship and material. If any failure resulting from either workmanship or material defect should occur under normal and proper usage within the period stated hereunder from the original provable date of purchase, such failure should be repaired at no cost to the buyer, provided the defective product is brought to a HITACHI AUTHORIZED SERVICE CENTER in Canada.
HITACHI VIDEO PRODUCT PRODUIT VIDEO YOUR WARRANTY VOTRE GARANTIE FOR SERVICE CONTACT 1-800-HITACHI 1-800-448-2244 POUR OBTENIR CE SERVICE VEUILLEZ COMPOSER LE 1-800-HITACHI 1-800-448-2244 HITACHI HITACHI HITACHI CANADA LTD. DIGITAL MEDIA DIVISION 2495 Meadowpine Blvd., Mississauga, Ontario L5N 6C3 CANADA IMPORTANT NOTICE: This warranty will not apply to product purchased outside Canada OR sold by any organization other than HITACHI CANADA LTD.