Camcorder User Manual

English

REMOVING DISC

1 Press down the DISC

EJECT button once and

release it.

In a moment, the cover

of disc insertion block

will open.

If the DVD video

camera/recorder is on

at this time, the

“EJECT” indicator will blink on the LCD

monitor or in the viewfinder.

2 Gently open the cover

fully until it stops.

3 Remove the disc.

While pushing down the centre portion of

turntable, pick up the disc, holding its edge,

to remove it.

4 Gently push the section

indicated “PUSH CLOSE”

on the cover of disc

insertion block, to close the

cover.

Note:

• Do not remove the battery or disconnect the AC

adapter/charger during removal of the disc or until

power is completely turned off: If you do, the disc

cover will not open. If this happens, reattach the

battery or AC adapter/charger, push down the DISC

EJECT button once, and then release it.

• Do not insert anything other than the 8 cm DVD-RAM

or DVD-R disc into the disc insertion block: Doing so

could cause malfunctions.

• When inserting or removing the disc, BE SURE NOT

to look into the lens in laser pickup: Doing so could

damage your eyesight.

DISC EJECT

Tu rn ta bl e