Manual

Card error has The card may be damaged: Use another card.
occurred.
Formatting is not 23
complete.
Card error has Card error could have occurred during editing of scenes. Turn off
occurred. Keep card the DVD video camera/recorder with the card being used inside,
inside & restart, connect the AC adapter/charger, and then power the DVD video 24, 29
camera/recorder again.
Card full. Delete unnecessary stills and try the card, or use another card. 77, 145
Card is not formatted. Was the card formatted on PC? When using the card on this DVD
97
Format the card now? video camera/recorder, choose "YES" and format it.
CHECK DISC A disc unusable on this DVD video camera/recorder may have
been inserted or the disc may be damaged. 23, 98
Make sure that the type of disc is correct, and make sure that the
disc is not write-protected.
Control Information Mismatch may occur between the recorded image and scene
Error. information. 99
Update the control information.
• Use another disc.
10,22
• See *3 and *4 on page 135.
DISC ACCESS The recorded scene is being stored on disc. 39, 40
This DVD video camera/recorder is verifying whether the correct
disc has been inserted. 36
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
DISC ALMOST FULL The remaining free space of disc is less than one minute for
video: Delete unwanted scenes, or use another disc. 77, 145
Disc error has occurred. • Disc error occurred during finalizing, and finalizing failed.
Finalizing is not Replace the disc. 100
complete. • See *3 on page 135.
Disc error has occurred. • Has the disc been initialized on PC? Has initializing the disc on
Format the disc now? PC been interrupted?
Choose "YES" and initialize the disc when using it on this DVD 97
video camera/recorder. Initializing the disc will erase all data on
it.
• See *2 on page 134.
Disc error has occurred. The disc may be dirty.
Formatting is not Remove the disc and wipe off fingerprints, dust, etc. before
complete, reusing it, or use another disc. 10, 97
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
Disc error has occurred. Disc error could have occurred during editing of scenes.
Keep disc inside & Turn off the DVD video camera/recorder with the disc being used 24
restart, in it, connect AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be tried.
Disc error has occurred. This message will appear when disc error occurred during
Unfinalizing is not unfinalization, and unfinalizing disc failed. Replace the disc. 101
complete.
131