Manual

|
PROTECTING DISC FROM WRITING (PROTECT DISC)
You can protect a DVD-RAM/DVD-RW (VR-mode) disc in order to prex ent recorded images from
being erased o1:edited by mistake. Further recording will not be possible on protected disc until the
protection is released.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3Use the I_1_/I'_1/'_1/I"1_/)/11 buttons to
choose "Protect Disc" on the "Disc" menu
screen, and then press the I1_/11button.
4 The screen for verifying protection will
appear:
Note:
• To release disc protection, perform the same
procedure as above: The screen for verifying the
release of protection will appear.
Choose "YES" to release the protection.
• If disc protection has been engaged on another
device, it may not be releasable on this DVD video
camera/recorder: Use the original device that
protected the disc to release the protection.
Choose "YES", and then press the I_/ll
button.
Choose "NO" to cancel protection.
After "YES" or "NO" setting, the Disc
Navigation screen will be restored.
VERIFYING REMAINING FREE SPACE ON DISC OR CARD (CAPACITY)
You can find out how long you will be able to record on one side of disc o1: on card.
1Press the DISC NAVIGATION button.
2 Press the MENU button.
3Use the I_I_/D"I_I/_I_I/D"I_/)/II buttons to
choose "Capacity" on the "Disc" oi; "Card"
nrenu screen, and then press the I_/|| button.
4Press the • button to quit.
The Disc Navigation screen will be restored.
Note:
With a write-protected disc or locked card, the
remaining space will always be displayed as "0".
(When using disc) (When using card)
rnr_Y Appro×
*t WOEO[XTR_), 17rain [ PHOTO[FreE),4S_
VmEO[FINE_, 2_min
I I ................ I I ................
PHOTO_EeO) ,1S48
"2_ PHOTO ,996 I Capa_Hy ,9_;
I-:............ I
RETURN I I ,_RETVRN I
"1 WithDVD-RW(VF-mode)/DVD-R disc: The quality
mode first used for recording with disc will appea_
*2 WithDVD-RW/DVD-R/+RW disc: Thiswill not be
displayed.
98