Operating Instructions

English
165
Card error. • The card terminals may be dirty: Wipe off dirt, and try the card
again, or use another card.
• Data other than still image may be included: Use another card.
30
Card error has occurred.
Keep card inside &
restart.
Card error could have occurred during editing of scenes. Turn off the
DVD video camera/recorder with the card being used inside,
connect the AC adapter/charger, and then power the DVD video
camera/recorder again. Repair of scenes will be attempted.
46, 51
Card full. Delete unnecessary stills and try the card, or use another card.
32, 109
No more recording on this card can be done: Delete unnecessary
stills or use another card.
Card full.
Cannot execute.
Delete unnecessary stills and try the card, or use another card.
32, 109
Card has no data. This message will appear when an attempt is made to execute
playback or editing on Disc Navigation with no scene recorded.

Card is not formatted.
Format the card now?
Was the card formatted on PC? When using the card on this DVD
video camera/recorder, choose “YES” and format it.
133
Control Information
Error.
Mismatch may occur between the recorded image and scene
information.
Update the control information.
134
• Use another disc.
• See *3 on page 169.
27, 85
DISC ACCESS The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
52, 53
This DVD video camera/recorder is verifying whether the correct
disc has been inserted.
Wait until the message disappears, and you can start to use the
DVD video camera/recorder.
This message will be displayed for a little longer when the date
changes.

DISC ALMOST FULL The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes and try the disc again, or use another
disc.
31, 109
Disc error has occurred.
Finalizing is not
complete.
• Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
• See *3 on page 169.
135
Disc error has occurred.
Format the disc now?
• Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose “YES” and initialize the disc when using it on this DVD
video camera/recorder. Initializing the disc will erase all data on it.
• See *2 on page 169.
133
Disc error has occurred.
Formatting is not
complete.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
85, 133
Message Cause & Troubleshooting
Reference
page