Operating Instructions

English
24
3Start recording (P. 52).
1Open the LCD monitor (P. 38).
2While holding the gray switch at the center of
power switch, set the switch to “O VIDEO” or
“N PHOTO”. (“O VIDEO” only for DVD-R
disc)
3Press the REC button.
Recording will start.
Pressing the REC button again will stop
recording (O VIDEO).
Pressing REC will enable you to record one
photo (N PHOTO).
Note:
• When using an unformatted disc, format (initialize) it on this DVD video camera/recorder.
If unformatted disc is inserted into this DVD video camera/recorder, a message will appear: Format the disc
following the instructions on screen (P. 48, 133). Initializing the DVD-RAM disc will erase all the recorded
contents: Make sure the contents on disc are not valuable before initializing the disc.
• See Check 1 on P. 161 if recording is not possible with “O VIDEO”.
• See Check 2 on P. 161 if recording is not possible with “N PHOTO”.
4View the playback of recorded content on LCD monitor screen (P. 38).
1After recording is finished, press the A
button.
The recorded scene will be played back.
2Press the C button to stop playback.