Operating Instructions

English
98
123
SETTING ON-SCREEN DISPLAY OUTPUT ON OR OFF (OSD OUTPUT)
If you connect this DVD video camera/recorder to a TV to view images on TV screen, you can switch
off the on-screen information (displayed in the viewfinder or on the LCD screen) from the TV screen.
1Press the MENU button,
choose “OSD output” on
the “Record Functions
Setup” menu screen, and
then press the A
button.
2Choose “On” or “Off”, and press the A
button.
3Press the MENU button to end the setting.
Note:
• The “OSD Output” setting will be stored in memory even
when the DVD video camera/recorder is turned off.
• Even if “Off” is chosen, the on-screen information will
appear during playback. See page 65 for playback on-
screen information display.
• Even after the on-screen information is removed from
the TV screen, it will still appear in the viewfinder or on
the LCD screen.
• The on-screen display output functions only when the
input selection is set to camera.
RAM
ENTER RETURN
On
Of f
OSD Ou t p u t
Record Funct i ons Setup
VI DEO Mode
3 0 MIN
0:00:00
REM
FINE
8:00
30/ 9/2004
3 0 MIN
0:00:00
REM
FINE
8:00
30/ 9/2004
LCD screen or viewfinder
“On” setting
“Off” setting
TV screen TV screen