Owner's Manual

18
Introduction
Adjusting the hand strap
Fasten the hand strap according to the procedure in the diagram.
Attaching the lens cap
Tie the lens cap to the hand strap using the string (all supplied).
Pass the small loop end of the string through the lens cap
eyelet and knot.
Tie the strap to the the hand strap.
Attach the lens cap to the lens.
Warning
BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT
RECHARGE, DISASSEMBLE, OR DISPOSE OF IN FIRE.
Note
Replace the battery with a Hitachi Maxell, Sony, Panasonic, Sanyo, Toshiba
CR2032, or Duracell DL2032. Use of another battery may present a risk of
fire or explosion.
Flip the cover.
Flip the belt.
Replace the belt.
Replace the cover.
small loop
Notes
• To protect the lens, attach the lens cap to the lens when you are not using
the camcorder.
• Wipe the lens using a soft dry cloth if the lens gets dirty.
DZ-HS903-803-US-Ea_IM_v01d05n02.p.book Page 18 Friday, September 12, 2008 8:22 PM