Instruction Manual

E-3
Operation Buttons and Indicators /
Operation Buttons and Indicators
The indicator is lit green when
the Auto Mode is running.
Indicates airflow rate during operation.
Use this button to start and stop
operation, and to switch the
operation mode and airfl ow rate.
Silent
(Green)
Med
(Green)
Max
(Green)
The indicator is lit green
when the 2-hour timer is set.
Direct the remote controller at this
location before pressing buttons.
Airflow Level P.E-9 Auto Mode P.E-9
On/Off Button P.E-11
Timer P.E-10
Detects air contamination
such as cigarette smell.
Odor Sensor P.E-11 Infrared Remote Receiver
Remote Controller
Point the remote controller at the infrared receiver on the purifi er when you operate.
The remote controllable distance is approx. 6m maximum when pointing the remote controller squarely to the receiver.


Press this button to start or
stop operation.
On/Off Button P.E-8
Press this button to switch the
mode in automatic operations.
Mode Button P.E-9
Press this button to start max
operation.
Press this button to switch
airflow rate.
Max button P.E-10
Airflow Button P.E-9
Press this button to set Off-
timer.
The remote control may not work in a room where inverter lighting apparatus or electronic quick start
lighting apparatus is used, or when the infrared receiver is exposed to direct sunlight.
If you operate the remote controller not pointing straight to the front face of the purifi er, the sensitivity
will be reduced. Operate the controller from the place in front of the purifi er whenever possible.


Note
Provided Accessories
Filter
Housed inside the purifi er.
∗
Be sure to remove this
fi lter from plastic bag
before operating the
purifi er.
(x1) (x1) (x2)
Remote controller “AAA” R03
batteries for remote controller
Timer Button P.E-10
Features / Name of Each Component / Operation Buttons and Indicators / Accessories

P.E-OO shows a page with further description.
11/18/2011 8:40:40 AM