Operation Manual

23
English
Information for power supply system to be used with
electric tools provided with rated voltage 230 V~
Switching operations of electric apparatus cause voltage
fluctuations.
The operation of electric tools listed below under unfa-
vorable mains conditions can have adverse effects to the
operation of other electric apparatus.
With a mains impedance equal or less than _Z_ Ohms
there will probably be no negative effects.
Usually, the maximum permissible mains impedance will
not be exceeded when the branch to the power outlet is
fed from a junction box with a service capacity of _A_
ampere or higher.
In case of power failure, or when the power plug is pulled
out, immediately return the switch to OFF position. This
prevents an uncontrolled restart.
ZA
G18SE2 0.23 32
G18SG 0.23 32
G18SH 0.28 27
G23SC2 0.23 32
G23SE 0.23 32
G23SF 0.28 27