Manual

English I

Move the grinder in the proper

direction.

When using a new depressed center

wheel in direction A (Fig. 2), the

wheel edge may cut into the work-

piece. In this case, grind in direction B

(Fig. 2).

Once the wheel edge is worn, the

workpiece can be ground in both

directions.

NOTE: The wheel provided (resinoid wheel) is rated as Class A grain and #36 grain

size. It is most suitable for heavy grinding of steel and other types of materi-

als.

6. Adjust operation to desired finish.

For a fine finish, decrease pressure by lifting slightly. Grind slowly and at the

appropriate speed.

z_CAUTION " The revolving depressed center wheel will create air turbulence.

Do no lay grinder down in areas of dust or dirt until it has come

to a complete stop.