Operation Manual

10
English
STANDARD ACCESSORIES
GP10DL
(2LCSK)
1 Accessories × 40 pcs ...................... 1
2 Battery (BCL1015) ........................... 2
3 Charger (UC10SFL) ......................... 1
4 Plastic case ..................................... 1
5 Battery cover ................................... 1
Use for wood
engraving and
grinding.
Use to machine hard
materials such as
glass and ceramics.
Use to engrave,
grind and make
grooves in wood,
plastic and soft
metals (aluminium,
copper, brass).
Use to make holes in
wood and plywood.
Use to slice or cut
materials.
Suitable for cutting thin
rods and pipes.
Recuts crushed
grooves in screw heads.
Do not press hard
against workpiece as it
may crack.
Use to polish hard
materials such as
stainless steel.
Suitable for fi nal
polishing after rough
grinding.
Use to give smooth
fi nish to metal
surfaces.
Use for mirror
polishing of jewelry
and metals.
Choose the size to
suit the workpiece.
Suitable for tasks such
as shaping wood and
fi nishing models.
Grind in two stages
with diff erent grit
numbers to achieve a
good surface fi nish.
Aluminium oxide point [φ15.9 mm × 1]
15.9 mm
Silicon carbide point [φ4.8 mm × 1]
4.8 mm
High-speed cutter [φ3.2 mm × 1]
3.2 mm
Drill [φ3.2 mm × 1]
3.2 mm
Felt polishing wheel [φ12.7 mm × 4]
12.7 mm
Felt polishing wheel [φ25.4 mm × 2]
25.4 mm
Sanding band [φ12.7 mm/60-grit × 6]
12.7 mm
60-grit
Sanding band [φ12.7 mm/120-grit × 2]
12.7 mm
120-grit
Cutting wheel [φ23.8 × t0.6 × 6]
23.8 mm
0.6 mm
Cutting wheel [φ23.8 × t1.0 × 2]
23.8 mm
1.0 mm
Aluminium oxide grinding wheel [φ22.2 × 1]
22.2 mm
Sanding disc [φ19.1 mm/180-grit × 10]
19.1 mm
180-grit
Polishing wheel [φ25.4 mm × 2]
25.4 mm
Collet spanner (for loosening
tight collet nuts)
Wheel mandrel
[φ3.2 mm × 1]
Screw-type mandrel
[φ3.2 mm × 1]
Drum mandrel
[φ3.2 mm × 1]
<Uses>
[Accessory]
GP10DL
(LCSK)
1 Accessories × 40 pcs ...................... 1
2 Battery (BCL1015) ........................... 1
3 Charger (UC10SFL) ......................... 1
4 Plastic case ..................................... 1
GP10DL
(NN)
1 Accessories × 40 pcs ...................... 1
For details of the attachments, refer to “Provided
attachments”.
Standard accessories are subject to change without
notice.
Provided attachments
CAUTION
Standard attachments are exclusively for
use with the GP10DL. Do not use with other
equipment such as electric drills, etc. Doing so
may result in injury or damage to the tip tool.
000Book_GP10DL_WE.indb 10000Book_GP10DL_WE.indb 10 2010/04/23 16:12:072010/04/23 16:12:07