Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
1-68 GR2K-GA-0014
Ver. 07-02
Description: Specifies the value of the EXP field. Setting is possible only in
the ordinary packet flow detecting condition. The list
information set by this parameter should be specified as the
flow control of the input side that specified in (Inbound). If
specified out (Outbound), the specification is invalid. In
addition, the conditions of the said parameter are invalid even
if other flow detecting condition parameters are set. The
number of packets that coincide with the flow detection
conditions is not displayed. (This parameter is valid for RP-CV
and RP-DV.)
Default: None.
Range of value: 0 to 7.
Specifies the transmitter port number.
If port to be specified is one: nnnnn
If port number is specified by range:nnnnn-nnnnn
Default: None (the transmitter port number is not included in the flow
detecting condition.)
Range of value: 0 to 65535 (decimal). (Please refer to Table 1-25.)
Specifies the destination port number.
If port to be specified is one: nnnnn
If port number is specified by range:nnnnn-nnnnn
Default: None (the transmitter port number is not included in the flow
detecting condition.)
Range of value: 0 to 65535 (decimal). (Please refer to Table 1-25.)
Description: Specifies the IGMP type.
Default: None.(TheIGMPtypeisnotincludedintheflowdetecting
condition.)
Table 1-40 General ICMP Type Code Number
Port Dumber
(Decimal)
Name
20/tcp File Transfer [Default Data]
21/tcp File Transfer [Control]
22/tcp Secure Shell Login
23/tcp Telnet
25/tcp Simple Mail Transfer
53/tcp 53/udp Domain Name Server
80/tcp World Wide Web HTTP
110/tcp 10/udp Post Office Protocol - Version 3
161/udp SNMP