Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
1-70 GR2K-GA-0014
Ver. 07-02
Ordinary packet flow detecting condition} [premium {important packet flow detecting
condition}]
When the maximum band restriction (-max_rate) or the minimum band
assurance (-min_rate) is executed, the important packet is transferred with
priority given in the band, and the ordinary packet is transferred when the
important packet is not transferred by using all the bands. This function is called
the important packet assuring function.
The flow detecting conditions for the ordinary packet are inputted before the
premium, and the flow detecting conditions for the important packet after the
premium. The flow detecting conditions for the important packet can be set only
after either one of the maximum band restriction
(-max_rate) or the minimum band assurance (-min_rate) has been set.
The parameters that have not been set in the important packet flow detecting
conditionsaresubjectedtothesameconditionsastheparametersthathave
been set in the ordinary packet flow detecting conditions. For setting the
important packet flow detecting conditions, set only the flow detecting condition
parameters whose detecting conditions differ from the ordinary packet flow
detecting conditions.
When the important packet protecting function is used, the number of entries
used per list becomes two or four entries. (*1)
(This parameter is effective only for RP-C and RP-D.)
Default: None. (The important packet protecting function is not used.)
Range of value: [<ICMPv6_Code>]
Operation parameter
If the operation parameter is either set or changed, please be sure to set this
parameter at the head of the whole operation parameter.
Default: None (No default is possible when designating the operation.)
Range of value: None
Specifies the contract band by kbit/s. Specifies burst size in byte unit. If a value
greater than the line speed is set, no action at breach is taken.
When setting this parameter, it is not possible to set -max_rate, -max_burst, and
min_rate_rate, -min_rate_burst. (-upc_burst is effective only in RP-C, RP-D,
RP-D6, RP-CV, RP-DV, GR2000-1B, GR2000-2B, GR2000-2B+ and GR2000-BH.)
Default: None. (No contract band surveillance is executed.)
Range of value: <kbps>: 0 to 2400000 (0 to 2.4G) (10-decimals).
If0to11isspecifiedinthecaseofRP-A,theoperationis
performed by taking the contract band as 12[kbps].
If0to4isspecifiedinthecaseofRP-C,RP-D,RP-C6,RP-D6,
RP-CV, RP-DV, GR2000-1B, GR2000-2B, GR2000-2B+ and
GR2000-BH, the operation is performed by taking the contract
band as 4.1[kbps].
<Byte>: 0 to 131072 (10-decimals)