Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
1-154 GR2K-GA-0014
Ver. 07-02
Deleting information
Displaying information
Table 1-75 shows the parameters that can be set by each transmission control.
Table 1-75 Parameters That Can be Set by Each Transmission Control
Parameter
Sending Control
Output
Priority
Control
Minimum
Bandwidth
Guarantee
Round-
robin
Uniform
minimum
band
guarantee
Minimum
Bandwidth
Guarantee
(specified in
kbit/s)
Bandwidt
h control
(specified
in traffic)
Group
bandwidth
control
<Line Name>
√ √ √ √ √(∗1) √(∗2)
√(∗4)
<DLCI Name> √√ √√-- -- --
<Timeslot Name> √√ √-- √(∗1) -- --
<Peer Name> √√ √-- -- -- --
<VLAN Name> √ -- -- -- -- √(*3) √(*4)
-queue_list
<Queue-List-Name>
√√ √√√ √
--
-queue_list
<Queue-List-Name>
-- -- -- -- -- -- √(*4)
-group <No.> -- -- -- -- -- -- √(*4)
-peak_rate <kbps> -- -- -- -- -- -- √(*4)
-traffic <Queue No.>
-constant-peak_rate
<kbps>
-- -- -- -- -- -- √(*4)
√ : Usable
-: Unusable
*1: Only a slow-speed WAN line can be set.
*2: Only an Ethernet line and a Gigabit Ethernet line can be set.
*3: Only VLAN lines in GR2000-1B and GR2000-2B can be set.
*4: Only Ethernet lines and Gigabit Ethernet lines in GR2000-1B and GR2000-2B can be set.