Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
1-184 GR2K-GA-0014
Ver. 07-02
4. When specifying the maximum output priority and output interface queue count
be sure that the class count and queue count match. If not, class No. and queue
No. are mapped and distribute packets to each queue. Mapping class and queue
numbersislistedinTable1-94,
a. When the maximum output priority is 8:
Table 1-93 TOS Replacing Value for Setting Value
Setting Value
TOS
Replacing
Value
Setting Value
TOS
Replacing
Value
Setting Value
TOS
Replacing
Value
0-3 0 88-91 88 176-179 176
4-7 4 92-95 92 180-183 180
8-11 8 96-99 96 184-187 184
12-15 12 100-103 100 188-191 188
16-19 16 104-107 104 192-195 192
20-23 20 108-111 108 196-199 196
24-27 24 112-115 112 200-203 200
28-31 28 116-119 116 204-207 204
32-35 32 120-123 120 208-211 208
36-39 36 124-127 124 212-215 212
40-43 40 128-131 128 216-219 216
44-47 44 132-135 132 220-223 220
48-51 48 136-139 136 224-227 224
52-55 52 140-143 140 228-231 228
56-59 56 144-147 144 232-235 232
60-63 60 148-151 148 236-239 236
64-67 64 152-155 152 240-243 240
68-71 68 156-159 156 244-247 244
72-75 72 160-163 160 248-251 248
76-79 76 164-167 164 252-255 252
80-83 80 168-171 168
84-87 84 172-175 172
Table 1-94 Mapping of Class No. and Queue No. (Max Output Priority is 8)
Class No.
Queue No.
Queue Count: 8
(matched)
Queue Count: 16
(unmatched)
Queue Count: 32
(unmatched)
1111
2235
3359
44713
55917
661121
771325
881529