Gigabit Router Configuration Guide

IPX/BridgeInformation
GR2K-GA-0014 2-5
Ver. 07-02
Description: This parameter is the RIP packet’ssendswitchwhenthereisa
change in the network where the RIP Request reply and the
local router can be routed at start-up.
(Do not send RIP packet.)
(Send RIP packet.)
Default: -
non_periodic_rip_send
Description: This parameter is the SAP packet’ssendswitchwhenthereis
a change in the server by which the SAP Request and the local
router can be routed at start-up.
(Do not send SAP packet.)
(Send SAP packet.)
Default:
Description: This parameter specifies the send interval (minutes) of the
periodic RIP packet.
Default:
1
Range of value: 0-1440 (0 does not deliver this packet periodically)
Description: This parameter specifies the send interval (minutes) of the
periodic SAP packet.
Default:
1
Range of value: 0-1440 (0 does not deliver this packet periodically
Description: This parameter sets the operation of the nearest SAP for the
relevant interface. The following operations may be executed.
nearest_sap_reply :
Reply to the nearest SAP request even when this interface
already has the SAP information for the service type with the
nearest SAP request. However, the reply information does not
contain the SAP information learned by the nearest SAP
request receive interface.
nearest_sap_reply_off :
Do not reply to the nearest SAP request when this interface
already has the SAP information for the service type with the
nearest SAP request.
Default: -
nearest_sap_reply_off