Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
2-36 GR2K-GA-0014
Ver. 07-02
Displaying
Parameters
Description: This parameter sets whether you perform extended-filtering:
-
yes indicates extended filtering, and no indicates -no extended
filtering.
Default: -
no
Description: This parameter specifies the name of the interface that
performs extended-filtering. When you specify
all,all
interfaces perform extended filtering. The DLCI name can be
specified for Frame Relay, and the VC name and group name
can be specified for ATM. The Peer Name can be specified for
ISDN.
Default: Cannot be omitted
Description: This parameter configures filtering operation: drop discards
frames that match the filtering conditions, and
forward relays
frames that match the filtering conditions only to recipients
specified by interface name.
Default: -
drop
Description: Specifies filtering conditions (choose from the list below). You
can configure up to three items; however, only one item can be
set at a time. For example, when configuring three items, first
configureasfilter1,thenasfilter2andfilter3.
off: No information
da: Recipient MAC address (6 octet)
sa: Sender MAC address (6 octet)
dsap: Recipient SAP (1 octet)
ssap:SenderSAP(1octet)
ctl: Control field (1 octet)
oui: Organization code (3 octet)
pid: Protocol ID (2 octet)
type: TypefieldwhentheformatisEthernet.
user: Specifying any user defined fields.
Default:
off