Gigabit Router Configuration Guide

Hitachi Gigabit Router GR2000 SeriesEnhanced Version Configuration Commands, Vol. 2
4-56 GR2K-GA-0014
Ver. 07-02
4.7.17 Bridge information
Input Format
Parameters
The initial value items that can be set using bridge Information and the initial values
during initial installation are shown in Table 4-17. For details of each parameter,
refer to the configuration definition information in "Section 2.2, “Bridge Objects".
Table 4-17 List of Initial Values That Can Be Set Using IPX Information and Initial
Values During Initial Installation
Information
Group Name
Information Name Initial Value
Bridge
information
Designation of bridge interface
mode
Operation is disabled. (no)
spt path cost 10
spt priority 128
Bridge interface operation Possible (bridge_interface_enable)
FDDI translation Not translated.
(bridge_interface_translation_off)
Extended filtering operation Operates in drop. (no)
Designation of extended filtering
item
No information is provided. (off)
Extended filtering data value 0x000000000000
Extended filtering mask value 0x000000000000
Extended filtering offset value 0