Gigabit Router Configuration Guide

Configuration Error Messages
GR2K-GA-0014 5-75
Ver. 07-02
Can not set replace_dscp because group is
already defined.
The rewritten value for the contract band breach dscp cannot be set
because the QoS group band control group number (group) has
been defined. To set rewritten value for the contract band breach
dscp, delete the QoS group band control group number.
[ROUTE-OS6B]
Can not set penalty_dscp because group is
already defined.
The rewritten value for the contract band breach dscp cannot be set
because the QoS group band control group number (group) has
been defined. To set rewritten value for the contract band breach
dscp, delete the QoS group band control group number.
[ROUTE-OS6B]
Can not set dscp_map because group is
already defined.
The dscp_map cannot be set because the QoS group band control
group number (group) has been defined. To set the dscp_map,
delete the QoS group band control group number. [ROUTE-OS6B]
Can not set index because group is already
defined.
The connection branching index number cannot be set because the
QoS group band control group number (group) has been defined. To
set the connection branching index number, delete the QoS group
band control group number. [ROUTE-OS6B]
Can not set upc because group is already
defined.
The band setting cannot be set because the QoS group band control
group number (group) has been defined. To set the band setting,
delete the QoS group band control group number. [ROUTE-OS6B]
Can not set max_rate because group is
already defined.
The maximum band restriction cannot be set because the QoS group
band control group number (group) has been defined. To set the
maximum band restriction, delete the QoS group band control group
number. [ROUTE-OS6B]
Can not set min_rate because group is
already defined.
The minimum band guarantee cannot be set because the QoS group
band control group number (group) has been defined. To set the
minimum band guarantee, delete the QoS group band control group
number. [ROUTE-OS6B]
Can not set qos_ip_list or filter_list because
nat configuration is already defined.
It is not possible to set "qos_ip_list" or "filter_list" because nat
configuration information is set. It is necessary to delete nat in order
to set "qos_ip_list" or "filter_list."
Can not set flow configuration,qos_ip_list or
filter_list configuration simultaneously.
It is not possible to simultaneously set flow configuration information
and "qos_ip_list" or "filter_list" in the configuration definition file.
Delete "qos_ip_list" or "filter_list" in order to set flow configuration
information. In addition, delete flow configuration information in order
to set "qos_ip_list" or "filter_list."
Table 5-8 Flow Information Error Messages (continued)