Operation Manual

32
Item No. Part Name
1 Nylock High Tension Bolt M7 × 25
2 Damper Washer
3 Damper
4 Washer
5 Front Cover Ass’y
6 Retainer
7 Roll Pin D4 × 20
8 Retainer Pin
9 Damper (B)
10 Pushing Button
11 Set Spring
12 Front Cover
13 Second Hammer
14 Cylinder Case Ass’y
15 O-Ring (A)
16 Nylock Bolt (W/Flange) M6 × 25
17 Cylinder
18 O-Ring (S-48)
19 Striker
20 O-Ring
21 Piston Pin
22 Piston
23 Retaining Ring for D10 Shaft
24 Connecting Rod
25 Seal Lock Hex. Socket Hd. Bolt M4 × 12
26 Crank Cover
27 O-Ring (S-55)
28 Crank Shaft
29 Feather Key 4 × 4 × 10
30 Retaining Ring for D40 Hole
31 O-Ring (S-40)
32 Ball Bearing (6203DDUCMAV2S)
33 Oil Seal
34 Name Plate
35A Crank Case
36 Handle Damper
37 Transatory Unit
38 Handle Packing (A)
39 First Gear
40 HITACHI Label
41 Needle Bearing (M661)
42A Gear Cover Ass’y
43 Ball Bearing (6201VVCMPS2S)
44 Washer (B)
45 Side Handle
46 Spring
47 Handle Holder Ass’y
48 Handle Holder (B)
49 Roll Pin D6 × 22
50 Handle Holder (A)
Item No. Part Name
51 Handle Bolt
52 Fan
53 Armature
54 Fan Guide
55 Hex. Hd. Tapping Screw D5 × 50
56 Stator Ass’y
57 Brush Terminal
58 Terminal
59 Washer (A)
60 Ball Bearing (608VVMC2EPS2L)
61 Housing Ass’y
62 Hex. Socket Hd. Bolt (W/Flange) M5 × 45
63 Brush Cap
64 Carbon Brush
65 Brush Holder
66 Hex. Socket Set Screw M5 × 8
67 Bearing Bushing (B)
68 Tail Cover
69 Tapping Screw (W/Flange) D4 × 16
70 Internal Wire Holder
71 Handle Packing (B)
72 Tapping Screw (W/Washer) D5 × 20
73 Seal Lock Hex. Socket Hd. Bolt M5 × 12
74 Distance Piece (B)
75 Handle (B)
76A Internal Wire
77 Connector (50092)
78 Noise Suppressor
79 Support (B)
80 Connector (50091)
81 Internal Wire
82 Switch (A)
83 Handle (A)
84 Tapping Screw (W/Flange) D4 × 12
85 Holder Plate
86 Pillar Terminal
87 Tapping Screw (W/Flange) D4 × 25
88 Cord Armor
89 Terminal
90 Washer M4
91 Tapping Screw (W/Flange) D4 × 16
92 Cord Clip
93 Cord
501 Bull Point 280MM
505 Case
Parts are subject to possible modification without notice
due to improvements.
07Back_H41SA_WE_6L 08/12/10, 09:3032