Operation Manual

5
English
DEMOLITION HAMMER SAFETY WARNINGS
1. Wear ear protectors.
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Do not touch the bit during or immediately after
operation. The bit becomes very hot during operation
and could cause serious burns.
4. Wear earplugs to protect your ears during operation.
5. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
SPECIFICATIONS
Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Power Input 810W*
Full-load Impact Rate 3000 min
–1
Weight (without cord, side handle) 4.8 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Case ........................................................................... 1
(2) Bull Point .................................................................. 1
(3) Side Handle .............................................................. 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
䡬 Crushing
䡬 Asphalt Cutting
䡬 Surface Roughing
䡬 Tamping
䡬 Anchor work (for self-drilling anchors)
䡬 Syringe (for debris removal)
䡬 Cylinder case cover (For heat insulation of cylinder
case)
(1) Cutter
(2) Turning Handle
䡬 Scooping Work
(1) Bushing Tool
(2) Shank
(3) Drift Key
(1) Scoop
Cylinder case cover (rubber)
(1) Bull Point
Overall Length: 280, 450 mm
(1) Rammer
(2) Shank
Anchor size
(for impact)
No. 30 W3/8
No. 40 W1/2
No. 50 W5/8
(1) Anchor Adaptor
(for impact)
01Eng_H41SA_WE_6L 08/12/10, 09:235