Operation Manual

Press MENU to view the 7 day EPG. Press “5/6” to

navigate in Channels or Programmes. “3/4”key to

navigate through the channel and program list. With

RED/GREEN keys you can change schedule time. By

pressing YELLOW/BLUE you can advance the schedule

backward/ forward of a day. If you press info key you

can see easily the detailed help information and by

pressing info key again you can exit Help menu.

The starting time for EPG is the current time. You can

see the event information for the next two hours. By

pressing “5/6” key, you can go to the

next/previous hours. If you press SELECT when a next

event is highlighted, a reminder is set for the highlighted

program and a clock appears on the screen. Program

reminders can be set to signal that a program is about to

start when you are watching another channel. If you set

reminder to a program, then you will be asked for

switching to that channel when the reminder time is

reached.

6.2. MESSAGES

When the box receives no signal (e.g. the antenna cable is disconnected), “NO

SIGNAL” message is seen on the screen.

When there is no channel stored in the box, Timer Menu, Channel Table Menus are not accessible. Channel

navigation is not allowed. Therefore, trying to enter these menus or do channel navigation will display a warning

message on the screen.