Operating Instructions

EN-4

Charging the Battery

Charge the battery fully with the supplied battery charger before use.

1. Insert the battery into the battery charger.

2. Connect the power cord to the charger and

insert the plug into a wall outlet.

 The status LED on the charger lights red

when charging has started and lights

green when charging is completed. The

LED also lights green if no battery is

inserted into the charger.

 Charging time varies according to the

ambient temperature and the status of battery.

 Remove the battery after charging is completed.

Capturing Images

Your camera is equipped with a 3.0" full colour TFT LCD monitor to help you compose

images, playback recorded images/video clips or adjust menu settings.

1. Press the ON/OFF button to turn the power on.

 The status LED lights green and the camera is initiated.

2. Toggle the MODE button to [8].

3. Compose your image in the LCD monitor.

 Slide the zoom lever to =/X side to zoom in on the subject, and enlarges the

subject on the LCD monitor.

 Slide the zoom lever to >/Y side to zoom out on the subject, and provides a

wider angle image.

4. Press the shutter button.

 Pressing the shutter button down halfway

automatically focuses and adjusts the

exposure, and pressing the shutter button

down fully captures the images.

 The focus area frame turns green when the

camera is in focus and the exposure is

calculated.

 When the focus is not suitable, the frame of

the focus area turns red.