Instruction Manual

EN-25
MENU OPTIONS
Capture Menu
This menu is for the basic settings to be used when capturing still images.
1. Press the
ON/OFF button to turn the power on.
2. Press the
MODE button, and set the camera mode to any scene mode.
3. Press the MENU button to enter the [Capture] menu.
4. Select the desired option item with the c / d buttons, and press the
SET button to
enter its respective menu.
 The selectable items may vary in different capture modes.
5. Select the desired setting with the e / f buttons, and press the
SET button.
6. To exit from the menu, press the
MENU button.
Size
This sets the size of the image that will be captured.
* 12M / 8M / 4M / 2M / VGA
ISO
This sets the sensitivity for capturing images. When the sensitivity is raised (and the
ISO figure is increased), photography will become possible even in dark locations, but
the more pixelated (grainier) the image will appear.
* Auto / ISO100 / ISO 200 / ISO 400 / ISO 800 / ISO 1600
Quality
This sets the quality (compression) at which the image is captured.
* Fine / Standard / Economy
W. Balance
This sets the white balance for a variety of lighting conditions and permits images to be
captured that approach the conditions that are seen by the human eye.
*Auto / Incand. / Fluoresc.1 / Fluoresc.2 / Daylight / Cloudy / Manual WB
Sharpness
This sets the sharpness of the image that will be captured.
* Hard / Standard / Soft
Color
This sets the colour of the image that will be captured.
* Standard / Vivid / Sepia / B&W / Blue / Red / Green / Yellow / Purple
Saturation
This sets the saturation of the image that will be captured.
* High / Standard / Low
MENU SET
;;
MP
4
AUTO
MENU SET
;;